16
MAINTENANCE
Make sure to disconnect the
power before cleaning the
product.
WARNING
(Otherwise, the product might operate with
the possibility of electric shock or injury.)
Notice
Do not operate the product when the
composite and deodorizing filter is removed.
(The composite and deodorizing filter cannot
function while it is removed. Dust will be
inhaled into product inner parts, and causes
the product breakdown. )
When maintenance, do not leave the removed
parts unattended.
(Otherwise, it may cause tripping or damage.)
When using chemically treated cloth, make
sure to follow the instructions carefully.
Do not use the
detergents
shown on the
right.
Polish
A
lk
al
in
e
de
te
rg
en
t
Th
in
ne
r
Bl
ea
ch
K
er
os
en
e
A
lc
oh
ol
Cleaning method
Wipe off any dust and dirt using a well
wrung-out soft cloth
Body and Front panel
(about once a month)
Do not wipe it with a hard cloth or hardly.
Otherwise, the surface may be damaged.
Check page 8 to 10 for opening and closing
methods.
1
8~10
Lens(top left and
top right)
Dry cotton swab
Wipe the dirt off the lens with a dry
cotton swab
(about once every 3 months)
Remove the cover of dirt sensor as shown
below.
Wipe the lens with a dry cotton swab as
shown below.
3
1
Do not insert a cotton swab in other parts.
Be sure to disconnect power before cleaning.
You can use a light in order to see lens
clearly.
Dirt sensor
Wash with water
Pull out horizontally. (when installing, Insert
horizontally until it reaches the end)
Pre-filters
(about once a month)
Soak a soft cloth in warm water or water
with a neutral kitchen detergent, then scrub
to remove the stain.
Wipe the lens periodically.
(The sensor may not function normally with
accumulation of moisture and smoke from
cigarette.)
