10
Install filters
Front panel lock cover
SETUP
2
5
PM2.5
PM2.5
Close the front panel lock cover (2 pcs).
Front panel
press , and the “clean sign” blinks about
5 seconds.
Power on, PM2.5 concentration / timer
display window shows PM2.5 concentration.
When connecting power, the odor sensor
takes this moment as the baseline for the
level of cleanliness, so it is recommended
when the air in the room is clean (such as
when there is no cigarette smoke).
(the odor sensor baseline is updated
automatically depending on the level of
cleanliness in the room)
(
7
)
Power-on
Power-on.
OPERATION
This product adopts touch screen operation, contact area is as large as possible when using finger
to press (if contact area is too small, may result in no response after touch).
If power is disconnected while operating, when it is connected again, the product will automatically
restart and operate in the mode it was in when power was lost.
PM2.5
Timer button PM2.5 button
Silent Auto button Air volume button
Power off/on button
Close the front panel (2 pcs) slowly.
Make sure the front panel is closed in the position.
2
Notice
(
6
)
Front panel
