使用方法
开始或停止运转。
OPERATION
Turn on or off the product.
Power Off/On
运转关/开
再次按下此按钮，产品停止运转。
插入电源插头后
2
分钟内运转产品时，风量的“
Auto
”指示灯将闪烁约
2
分钟，
这提示异味感应器在准备状态。
上述以外的情況下，产品会以上次停止时的风量运转。
按下按钮产品开始运转。(风量指示灯亮起)
每按一下，指示灯将按下图顺序进行切换。
风量
根据感应器检测的空气污染程度，自动调节风量，
利用最佳的风量净化空气。
快速净化空气。
以中等速度净化空气。
低速安静地净化空气。
（指示灯亮起）
选择合适的风量净化空气。
(Indicator lights on)
Purify air quickly.
Purify air in medium speed.
Purify air quietly in low speed.
Select appropriate air volume for purifying air.
The indicator will be changed sequentially as figure below.
Automatically adjust the air volume according to the
air pollution detected by sensor, and use appropriate
air volume to purify air.
Air volume
11
使
用
方
法
OP
ERATION
运转关/开按钮
睡眠模式按钮
高速定时器按钮
风量按钮
Air volume
button
Sleep
button
Turbo timer
button
Power Off/On
button
3. Press the button again, the product stops operating.
Press the button to operate. (Air volume indicator lights on)
1. When using for the first time, operation will begin with the air volume
under “Auto”.
初次运转时以自动风量模式运转。
2. Other than the above situations, operation will begin with the air
volume from the last time it was stopped.
To operate product within 2 minutes after the power plug is inserted,
the indicator of air volume under “Auto” will blink about 2 minutes,
what it indicates the odor sensor is in the stanby mode.
