安装过滤网
产品上的钩爪(
2
处)
使产品上的凹槽(
3
处)与钩爪咬合。
将黑色面(正面)朝外，使与产品上的钩爪咬合。
安装过滤网(
2
种)和前面板。
安装脱臭过滤网。(无内外、上下的区分）
安装
HEPA
多功能过滤网。(有内外的区分、無上下的区分）
安装前面板。
将前面板的凸起处插入产品上的
小孔(
2
处)，并且向下按到底。
使用前请务必安装好前面板。
接通电源
插入电源插头。
因为异味感应器以插入电源插头时的空气
洁净度作为基准，所以建议当室内空气洁
净时(如没有烟味时)插入电源插头。
(异味感应器的基准会根据室内的空气洁
净度自动更新。)
设置
SETUP
Install filters
Power-on
Be sure to install front panel before use.
Install the filters (2 types) and front
panel.
Connect the
power plug.
Install deodorizing filter.
(There is no distinction between
inside and outside, upper and lower)
Install HEPA composite filter.
(There is distinction between inside and outside,
no distinction between upper and lower)
Install front panel.
When inserting the power plug,
as the odor sensor uses the degree
of cleanliness at this time as the
standard, we recommend that you
plug it in when the air is fresh (such
as when there is no cigarette smoke).
(The standard of the odor sensor
automatically updates itself according
to the degree of the indoor cleanliness.)
10
Press button, then the clean
sign blinks for about 5 seconds.
提示事項
Notice
Projections of the product (2 places)
With the black side (front side) outside,
and align it with the projections of the
product.
Fit the clutch into the
indentation (3 places)
of the product.
Push in the protrusion into
holes (2 places) of product
and press properly.
按下 按钮，空气污染度指示灯
闪烁约
5
秒。
