Panasonic EYADA Series, Руководство по эксплуатации, Страница: 99 / 120

41
EN
BEFORE USE
PREP
ARA
TION
OPERA
TION
OTHERS
BASIC SETTING MENU (b + NUMBER)
b1 Brake Setting
You can enable or disable braking
when rotation stops before clutch
activation.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
P. 22
Choose “b1” by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is “_1”.
Display Brake
OFF: Braking disabled
( Rotation stops slowly
when you release the
trigger switch.)
ON: Braking enabled
( Rotation stops
immediately when you
release the trigger
switch.)
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
b2 External-Output Signal Setting
You can select “Count-up signal” or
“Fastening NG (NOK) signal”, as the
external output signal.
P. 45
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
P. 22
Choose “b2” by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is “_1”.
Display External-output signal
Count-up signal
Fastening NG (NOK)
signal
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
EY9310ADA202.indb 41 EY9310ADA202.indb 41 2023/12/07 19:02:02 2023/12/07 19:02:02