Panasonic EYADA Series, Руководство по эксплуатации, Страница: 112 / 120

54
EN
SETTING MODE LIST
c series count (Settings related to quantity count)
c1 Count Quantity Setting
P. 25
－ － OFF 01 1 screw 02 2 screws
～
99 99 screws
c2 Count Method Setting
P. 26
＿ 1 Count-down mode ＿ 2 Count-up mode
c3 Count Return Setting P. 27 ＿ ＿ OFF ＿ 1 Return 1 count ＿ 2 Return to start
c4
Quantity Reset Permission Setting
P. 28
＿ ＿ Not permitted ＿ 1 Permitted
c5
Ignore Judgement Time Setting
P. 29
－ . － OFF 0.1 0.1 s 0.2 0.2 s
～
9.9 9.9 s
c6 Ignore Count Time Setting P. 30 － . － OFF 0.1 0.1 s 0.2 0.2 s
～
9.9 9.9 s
c7
Batch Complete Judgement
Waiting Time Setting
P. 31
－
.
－ OFF 0.1 0.1 s 0.2 0.2 s
～
9.9 9.9 s
u series utility (Utility settings that supports work)
u1
Soft Start & Soft Snug Time
Setting *
1 P. 32
－ . － OFF 0.1 0.1 s 0.2 0.2 s
～
9.9 9.9 s
u2
Soft Start Speed Level Setting
P. 33
01
Level 1
(About 25% of maximum)
02
Level 2
(About 33% of maximum)
～
10
Level 10
(Maximum speed)
u3
Soft Snug Speed Level Setting
P. 34
01
Level 1
(About 25% of maximum)
02
Level 2
(About 33% of maximum)
～
10
Level 10
(Maximum speed)
u4
Rotation Time-based Detection
Setting * 2 P. 35
－ . － OFF 0.1 0.1 s 0.2 0.2 s
～
9.9 9.9 s
u5
Automatic Rotation Stop Setting
P. 36
－ － OFF ＿ 1 ON
u6
Disable Fastening Time Setting
P. 37
0.5 0.5 s 0.6 0.6 s 0.7 0.7 s
～
9.9 9.9 s
u7 Stopwatch Mode
P. 38
－ － OFF ＿ 1 ON
n series notification (Settings related to notification, lamp, and buzzer)
n1
Lamp Lighting Colour Setting
P. 39
＿ ＿ OFF (Off) ＿ 1
Fastening OK: Green
Count-up (Count complete): Blue
＿ 2
Fastening OK: Blue
Count-up (Count complete): Green
n2 Buzzer Pattern Setting
P. 39
＿ 1 A long beep ＿ 2 Three short beeps
n3
Lamp Lighting Pattern Setting
P. 40
＿ ＿ OFF (Off) ＿ 1 Fastening NG (NOK): Solid red
Other errors: Blinking red
＿ 2
Fastening NG (NOK): Blinking red
Other errors: Solid red
n4 Buzzer (Volume) Setting
P. 40
＿ ＿ OFF (Mute) ＿ 1 Low volume ＿ 2 Medium volume ＿ 3 High volume
b series basic (Basic settings and overall settings)
b1 Brake Setting
P. 41
＿ ＿ OFF ＿ 1 ON
b2
External-Output Signal Setting
P. 41
＿ 1 Count-up signal ＿ 2 Fastening NG (NOK) signal
b3
External-Input Drive Permission
Setting
P. 42
＿ ＿
OFF
(Not permitted)
＿ 1
ON
(Permitted, lamp blinking)
＿ 2
ON
(Permitted, lamp off)
b4 Tool reset permission
P. 43
＿ ＿ Not permitted ＿ 1 Permitted
*1 Set two values, i.e. the time of soft start and the time of soft snug, in sequence.
*2 Set two values, i.e. the lower limit time and the upper limit time, in sequence.
EY9310ADA202.indb 54 EY9310ADA202.indb 54 2023/12/07 19:02:04 2023/12/07 19:02:04