Panasonic EYADA Series Скачать руководство пользователя страница 72

Страница: 72 / 120

PREPARATION BEFORE USE

(cont.)

Attaching Bit

ATTENTION

⿟

When attaching or removing a

bit, set the forward/reverse lever

to the “

○

(Trigger switch locked)”

position, and turn OFF the power

switch of the power adapter.

P. 13, 16

Pull the bit holder.

Insert a bit.

Insert it with the bit holder pulled.

Release the bit holder.

Check that the bit does not come

off, by pulling it lightly.

■

Bits That Can Be Attached to This

Unit

Ａ

Ｂ

6.35 mm

Ball groove section* Centre

* Straight bits without a ball groove

section cannot be used.

Length of A

(Double-ended bit) 12 mm to

17.5 mm

Length of B

(Single-ended bit)

9 mm to 13 mm

Removing Bit

ATTENTION

⿟

Immediately after work, do not

touch a bit or other pointed tools,

or screws.

They are hot and may cause

burns.

Pull the bit holder.

Remove the bit.

Pull it out with the bit holder pulled.

EY9310ADA202.indb 14

2023/12/07 19:01:54

Содержание EYADA Series

























































































































Результаты поиска

Содержание EYADA Series

Отзывы:

Panasonic EYADA Series, Руководство по эксплуатации, Страница: 72 / 120

Результаты поиска

Содержание EYADA Series

Отзывы: