Panasonic EYADA Series, Руководство по эксплуатации, Страница: 107 / 120

49
EN
BEFORE USE
PREP
ARA
TION
OPERA
TION
OTHERS
CAPACITY AND SPECIFICATIONS
BEFORE USE
PREP
ARA
TION
OPERA
TION
OTHERS
Tool Capacity
Model No. EYADA212XC EYADA218XC EYADA407XC
Recommended Work
Machine screw:
M2.5 to M4.5
Machine screw:
M2.5 to M4
Machine screw:
M3.5 to M5
Torque Setting Range 0.3 N ・ m to 2.5 N ・ m 0.3 N ・ m to 2.0 N ・ m 1.5 N ・ m to 4.4 N ・ m
Torque Setting Steps 96 steps
Fastening Torque
Accuracy*
±10%
Speed
1200 revolutions per
minute
(10-step adjustment)
1800 revolutions per
minute
(10-step adjustment)
650 revolutions per
minute
(10-step adjustment)
<Measurement conditions>
Based on our specified measurement conditions.
* Fastening torque and fastening torque accuracy vary depending on the work status.
Be sure to check them with actual work before use.
Tool Specifications
Power Supply Power supplied by power adapter (sold separately) 100 to 240 V AC 50/60 Hz
Motor
Brushless motor (30 V DC)
Bit Holder
One-touch bit locking mechanism
Applicable bits ( hex shank of 6.35 mm across flats,
single-ended 9 mm to 13 mm, double-ended 12 mm to 17.5 mm)
Size (Estimated
Dimensions)
Overall Length: 271 mm / Grip diameter: φ 38 mm
Mass (Weight) About 630
g
Trigger Switch Mode Both lever start mode and push start mode available (Switchable on a
single unit)
Communication
function
Wired (A separately sold communication cable is required.)
Output Signals Fastening OK signal
Fastening NG (NOK) signal
Count-up signal
Motor forward signal
Motor reverse signal
Input Signals Drive permission signal
Operation Panel
(Display)
7-segment display
Operation Button OK button / ▼ button / ▲ button
EY9310ADA202.indb 49 EY9310ADA202.indb 49 2023/12/07 19:02:03 2023/12/07 19:02:03