Panasonic EY6931 - 15.6V HAMMER DRILL, Руководство по обслуживанию

Страница: 7 / 12

Ref. No. 3C Procedure 3A
→ → → →
3B
→ → → →
3C Assembly of gear case
1. Reinstalling place 2pcs of steel balls into each of 6 holes.
2. Insert 6 pins into clutch case.
3. Assemble carrier, ring gear, 3 pieces of planet gear and
thrust plate.
4. Align the dent part of clutch case with positioning rib of gear
case. And tighten them with 4 screws.
5. Assemble ring gear B, carrier A, planet gear A, carrier B,
ring gear A, planet gear B and thrust plate.
NOTE :
Ring gear B has its own correct direction for proper
assembly.
6. Confirm proper position of High/Low change gear handle
when it is assembled. Both ends of spring must be put into
grooves of ring gear B.
7
EY6931