Panasonic EY6931 - 15.6V HAMMER DRILL, Руководство по обслуживанию

Страница: 6 / 12

4.1. HOW TO ASSEMBLE DRIVING BLOCK AND GEAR CASE.
Ref. No. 3A Procedure 3A Assembly of driving block.
1. Assemble clutch plate, clutch spring and adjust ring to outside of clutch case. 2. The click plate has its own correct direction for proper
assembly.
Adjust (A) groove of clutch case to protrusion part of click
plate.
3. Assemble vibration spring and cam A into clutch case. 5. Insert spring to driving shaft and assemble them to clutch
case.
4. When assembling change plates, make sure that protrusion side of change
plates face inside of clutch case.
Ref. No. 3B Procedure 3A
→ → → →
3B Assembly of clutch handle.
1. Set clutch handle B to position 1 toward dent part of clutch
case.
2. Insert 2 pins (Ø2×31.8) by pressing down clutch handle B
and driving shaft.
3. The change ring has its own correct direction. Confirm the
direction when change ring is inserted into clutch handle.
4. Select clutch handle B to
position before assembling
clutch handle A to gear block.
5. Adjust protrusion parts of change plate with groove parts of
change ring inside of clutch handle A.
6. Tighten 3 screws of clutch handle A.
6
EY6931