Panasonic EY6931 - 15.6V HAMMER DRILL, Руководство по обслуживанию

Страница: 4 / 12

Ref. No. 2B Procedure 2A
→
→ →
→
2B Removal or attachment of motor.
(Removal of motor.)
1. Remove motor with gear block from housing.
2. Separate motor from gear box block by twisting
motor to unlock tabs.
(Attachment for motor.)
3. Motor mounting base and positioning rib of gear
case should be set.
Ref. No. 2C Procedure 2A
→ → → →
2B
→ → → →
2C Removal of gear box block.
1. Set clutch handle B to position 1 before replacing
driving block from housing.
2. Loosen 3 screws of clutch handle A and remove
clutch handle from driving block.
3. Pull out 2 pins (Ø2×31.8) by pressing down on clutch
handle B and driving shaft.
4. After removing clutch handle B, internal parts of
driving block can be removed one after another.
driving shaft
→
spring
→
change plate (2pcs)
→
cam A
→
vibration spring
→
click plate
→
adjust ring
→
clutch
spring
→
clutch plate
→
steel ball (12pcs)
→
roller pin
(6pcs)
4
EY6931