Panasonic EY6931 - 15.6V HAMMER DRILL, Руководство по обслуживанию

Страница: 10 / 12

6 TRIAL OPERATION
(after checking TROUBLESHOOTING GUIDE.)
1. Check vibrating operation by setting clutch handle to , then touching bit on a board.
Impact rate per minutes : (HIGH) 4,500 - 30,000 b.p.m. (LOW) 1,200 - 8,250 b.p.m.
Impact strength : 1.7kN (170kgf)
2. Check clutch operation by setting clutch handle between 1-5.
Clutch torque : 5 steps (approx. 1.0 - 1.5 - 2.5 - 3.4 - 4.4 Nm)
(approx. 10 - 15 - 25 - 34 - 45 kg-cm)
3. Check rotation of clutch (without clutch operation) by setting to .
4. Check spped control in proportion to depression amount of switch handle.
Low : approx. 300 - 2,000 r.p.m.
High : approx. 80 - 550 r.p.m.
5. Check operation by selecting forward or reverse switch.
6. Check if 3 chuck claws open or close smoothly by turning lock handle.
Chuck : Ø1.5 - 13 mm
7. Screwdriver bit locks in place, check if it is locked and can be used as a manual screwdriver.
Torque : max. 25.5Nm (260kgf-cm)
10
EY6931