Panasonic ET-YFB200G, Руководство по эксплуатации

Страница: 58 / 97

Chapter 4 Settings — [OPTION] menu
58 - ENGLISH
[2]
Enables the backup function and switches to the secondary input automatically when the input signal
for primary input is disrupted.
Primary input is fixed to the <HDMI 2 IN> terminal, and the secondary input is fixed to the <HDMI 1
IN> terminal.
Note
f
To switch to the backup input (secondary input) signal using the backup function, fulfilling of the following 3 conditions are required to use
the function.
g
Set [BACKUP INPUT MODE] to [1] or [2].
g
Input the same signal to the primary and secondary inputs.
g
Select primary input.
f
When the input is automatically switched to the secondary input with the backup function, the current input (secondary input) will be
maintained even when the primary input signal is restored.
f
[BACKUP INPUT SETTING] cannot be set when the [OPTION] menu → [DIGITAL LINK OUT] (
x
page 52) → [FRAME LOCK] is set to
[ON], or when the [OPTION] menu → [DVI-D OUT] (
x
page 53) → [FRAME LOCK] is set to [ON]. The backup operation is not performed.
[RS-232C]
Set the ID number of the device, and communication condition of the <SERIAL IN> terminal and the <DIGITAL
LINK OUT 1> terminal/<DIGITAL LINK OUT 2> terminal.
For the connection example of the display (projector or flat panel display), communication cable specification, and
control command, refer to “<SERIAL IN> terminal” (
x
page 83).
Setting [ID]
Set the ID number of the device.
When the system is made up of multiple devices, such as connecting the display (projector or flat panel display)
via the <DIGITAL LINK OUT 1> terminal/<DIGITAL LINK OUT 2> terminal of this device, controlling with each ID
number from a single computer is possible by setting individual/shared ID number.
1) Press
as
to select [RS-232C].
2) Press the <ENTER> button.
f
The [RS-232C] screen is displayed.
3) Press
as
to select [ID].
4) Press
qw
to switch items.
f
The item is switched every time the button is pressed.
[1] - [6] Select the ID number.
Setting [(IN)BAUDRATE]
Sets the communication speed of the <SERIAL IN> terminal.
1) Press
as
to select [RS-232C].
2) Press the <ENTER> button.
f
The
[RS-232C]
screen is displayed.
3) Press
as
to select [(IN)BAUDRATE].
4) Press
qw
to switch items.
f
The item is switched every time the button is pressed.
[9600]
Select the appropriate speed. [19200]
[38400]
Setting [(IN)PARITY]
Set the parity of the <SERIAL IN> terminal.
1) Press
as
to select [RS-232C].