Panasonic ET-YFB200G Скачать руководство пользователя страница 32

Страница: 32 / 97

Chapter 3

Basic Operations — Turning on/off the power of the display

32 - ENGLISH

Turning on/off the power of the display

The power of the display (projector or flat panel display) connected to the <DIGITAL LINK OUT 1> terminal or the

<DIGITAL LINK OUT 2> terminal of the device can be turned off/on with the <DISPLAY DEVICE

1> button or

the <DISPLAY DEVICE

2> button in the control panel of the device.

The display (projector or flat panel display) connected to the <DIGITAL LINK OUT 1> terminal can be operated

with the <DISPLAY DEVICE

1> button. Also, the display connected to the <DIGITAL LINK OUT 2> terminal

can be operated with the <DISPLAY DEVICE

2> button.

Display device indicator <DISPLAY DEVICE>

<DISPLAY DEVICE

1> button/<DISPLAY DEVICE

2> button

Before turning off/on the power of the display

Checking the status of the device

Turn on the power of the device before operating the <DISPLAY DEVICE

1> button/<DISPLAY DEVICE

2> button. (

page 31)

To turn off/on the power of the display, set [(IN)PARITY] of the [OPTION] menu

→

[RS-232C] (

page 58) to

following.

To turn off/on the power of the projector
Set in accordance to the parity condition of the serial input terminal of the projector.

To turn off/on the power of the flat panel display

Set to [NONE].

To turn off/on the power of both the projector and the flat panel display

Set to [NONE].

Also set the parity condition of the serial input terminal of the projector to “NONE”.

Checking the display status

The target display is required to be in following conditions to turn off/on the power of the display with the

<DISPLAY DEVICE

1> button/<DISPLAY DEVICE

2> button. For details, refer to the Operating

Instructions of the display in use.

To turn on the power of the display

To turn on the power of the projector

Projector is in standby mode.

Network function is enabled even when the projector is in standby mode.

Communication method of DIGITAL LINK is enabled.

Control for the response is enabled when the “ID ALL” command is received.

To turn on the power of the flat panel display

Flat panel display is in standby mode.

Control with the DIGITAL LINK terminal or the LAN terminal is enabled.

RS-232C communication via the twisted-pair-cable transmitter is enabled.

Control for the response is enabled when the “ID ALL” command is received.

To turn off the power of the display

To turn off the power of the projector

Power of the projector is turned on (projecting mode).

Communication method of DIGITAL LINK is enabled.

Control for the response is enabled when the “ID ALL” command is received.

To turn off the power of the flat panel display

Содержание ET-YFB200G


































































































Результаты поиска

Содержание ET-YFB200G

Отзывы:

Бренды по названию

Популярные бренды

Panasonic ET-YFB200G, Руководство по эксплуатации

Результаты поиска

Содержание ET-YFB200G

Отзывы:

Бренды по названию

Популярные бренды