Panasonic ET-YFB200G, Руководство по эксплуатации

Страница: 44 / 97

Chapter 4 Settings — [POSITION] menu
44 - ENGLISH
[POSITION] menu
Select [POSITION] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 38) for the operation of the menu screen.
f
After selecting the item, press
asqw
to adjust.
f
Setting value of each item in the [POSITION] is reflected to all the video signals output from the <DVI-D OUT>
terminal and the <DIGITAL LINK OUT 1> terminal/<DIGITAL LINK OUT 2> terminal. Make adjustment on
the image display device connected to each terminal when individual adjustment for each output terminal is
required.
Note
f
All the setting items in the [POSITION] menu are disabled when 3D signal is output from the device.
[SHIFT]
Adjusts the projected or displayed image position.
f
When using a projector, confirm that the relative position of the projector and the screen is correctly installed
before adjusting the image position.
1) Press
as
to select [SHIFT].
2) Press the <ENTER> button.
f
The
[SHIFT]
individual adjustment screen is displayed.
3) Press
asqw
to adjust the position.
Orientation Operation Adjustment
Vertical (up and down)
adjustment
Press
a
.
The image position moves up.
Press
s
.
The image position moves down.
Horizontal (right and left)
adjustment
Press
w
. The image position moves to the right.
Press
q
.
The image position moves to the left.
[CLOCK PHASE]
Adjust the setting to achieve an optimal image when a flickering or smearing edge appears on the image.
1) Press
as
to select [CLOCK PHASE].
2) Press
qw
or the <ENTER> button.
f
The [CLOCK PHASE] individual adjustment screen is displayed.
3) Press
qw
to adjust.
f
Adjustment value will change between [0] and [+31]. Adjust so that the amount of interference is at a
minimum.
Note
f
Optimal value may not be achieved if the output from the input computer is unstable.