Area Ionizer
ER-X
SERIES
7
ORDER GUIDE
Heads
Head connection cable is not supplied with the head. Please order it separately.
Type
Appearance
Charge removal time
(±1,000 V→±100 V)
Ion balance
Effective charge
removal width
Model No.
Spot type
0.3 sec. or less
(Note 1),
0.5 sec. or less
(Note 2)
±30 V or less
(Note 2, 3)
50 mm
1.969 in
approx.
ER-X001
(Note 4)
Bar
type
1 sec. or less
(Note 2)
80 mm
3.150 in
approx.
ER-X008
(Note 4)
High
and low
temperature
resistant
ER-X008HC
(Note 5)
160 mm
6.299 in
approx.
ER-X016
High
and low
temperature
resistant
ER-X016HC
(Note 5)
320 mm
12.598 in
approx.
ER-X032
High
and low
temperature
resistant
ER-X032HC
(Note 5)
480 mm
18.898 in
approx.
ER-X048
High
and low
temperature
resistant
ER-X048HC
(Note 5)
640mm
25.197 in
approx.
ER-X064
High
and low
temperature
resistant
ER-X064HC
(Note 5)
Notes: 1) Typical value in condition of discharge distance 50 mm
1.969 in
, center of the product, discharge frequency 50 Hz and air supply 60 ℓ/min. (0.3 MPa).
2) Typical value in condition of discharge distance 100 mm
3.937 in
(
ER-X001
: 50 mm
1.969 in
), center of the product, discharge frequency 50 Hz
(
ER-X□HC
: 30 Hz) and no air supply.
3)
4)
Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature
change is less than ±10 °C, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.
The
ER-X001
and
ER-X008
must be combined with the new-type
ER-XC02
controller.
For the
Identification of previous-type and new-type controllers and for the combination with the head
, refer to p.1
6
.
5) The
ER-X□HC
high / low temperature resistant type head can be used under temperatures from -60 to +200 °C
-76 to +392 °F
. Be sure to use this head
in combination with the new-type controller,
ER-XC02
.
For the
Identification of previous-type and new-type controllers and for the combination with the head
, refer to p.1
6
.
