Area Ionizer
ER-X
SERIES
9
Heads
Type
Spot type
Bar type
Item
Model No.
ER-X001
ER-X008
ER-X016
ER-X032
ER-X048
ER-X064
CE marking directive compliance
EMC Directive, RoHS Directive
Effective charge removal width
50 mm
1.969 in
approx.
80 mm
3.150 in
approx.
160 mm
6.299 in
approx. 320 mm
12.598 in
approx. 480 mm
18.898 in
approx. 640 mm
25.197 in
approx.
Charge removal time
(±1,000 V→±100 V)
0.3 sec. or less (Note 1),
0.5 sec. or less (Note 2)
1 sec. or less (Note 2)
Ion balance
±30 V or less (Note 2, 3)
Discharge method
Pulse AC method
Discharge frequency
50 Hz / 20 Hz
50 Hz / 30 Hz / 20 Hz
/ 10 Hz / 5 Hz / 1 Hz
100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note 4)
Discharge output voltage
±7,000 V approx.
Ozone generation
0.01 ppm or less (Note 2)
Maximum air pressure
0.5 MPa
Applicable fluid
Air (dried clean air) (Note 5)
Operating altitude
2,000 m
6561.68 ft
or less (Note 6)
Ambient temperature
0 to +50 °C
+32 to +122 °F
(
ER-X001
: 0 to +40 °C
+32 to +104 °F
) (No dew condensation allowed), Storage: -10 to +65 °C
+14 to +149 °F
Ambient humidity
35 to 65 % RH, Storage: 35 to 85 % RH
Vibration resistance
10 to 55 Hz (
ER-X001
: 10 to 150 Hz) frequency, 0.75 mm
0.030 in
double amplitude in X, Y and Z directions for two hours each
Shock resistance
100 m/s
2
acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure grounding method
Floating
Material
Main unit enclosure: PPS, Stainless steal (SUS), Head mounting bracket: Stainless steal (SUS), Discharge needle: PC, PPS, Tungsten (Note 7)
[
ER-X001
– Main unit enclosure: Stainless steel (SUS), Head mounting bracket: Stainless steel (SUS), Discharge needle: PFA, Tungsten]
Length of high-voltage cable
1.2 m
3.937 ft
0.5 m
1.640 ft
0.5 m
1.640 ft
(Note 4)
Net weight
370 g approx.
330 g approx.
410 g approx.
530 g approx.
650 g approx.
780 g approx.
Accessory
Head mounting bracket (mounted at the factory)
Type
High and low temperature resistant
Item
Model No.
ER-X008HC
ER-X016HC
ER-X032HC
ER-X048HC
ER-X064HC
CE marking directive compliance
EMC Directive, RoHS Directive
Effective charge removal width 80 mm
3.150 in
approx. 160 mm
6.299 in
approx. 320 mm
12.598 in
approx. 480 mm
18.898 in
approx. 640 mm
25.197 in
approx.
Charge removal time
(±1,000 V→±100 V)
1 sec. or less (Note 2)
Ion balance
±30 V or less (Note 2, 3)
Discharge method
Pulse AC method
Discharge frequency
30 Hz (Note 8)
Discharge output voltage
±7,000 V approx.
Ozone generation
0.01 ppm or less (Note 2)
Maximum air pressure
0.1 MPa
Applicable fluid
Air (dried clean air) (Note 5)
Operating altitude
2,000 m
6561.68 ft
or less (Note 6)
Ambient temperature
Head: -60 to +200 °C
-76 to +392 °F
(No dew condensation or icing allowed) (Note 9), Storage: -10 to +65 °C
+14 to +149 °F
High voltage unit: 0 to +50 °C
+32 to +122 °F
(No dew condensation allowed), Storage: -10 to +65 °C
+14 to +149 °F
Ambient humidity
35 to 65 % RH, Storage: 35 to 85 % RH
Vibration resistance
10 to 55 Hz frequency, 0.75 mm
0.030 in
double amplitude in X, Y and Z directions for two hours each
Shock resistance
100 m/s
2
acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure grounding method
Floating
Material
Main unit enclosure: PPS, Stainless steal (SUS), Head mounting bracket: Stainless steal (SUS),
Discharge needle: PC, PPS, Tungsten, Main unit enclosure of high-voltage unit: ABS
Length of high-voltage cable
Heat-resistant shielded cable, 1.8 m
5.906 ft
long
Net weight
420 g approx.
490 g approx.
620 g approx.
760 g approx.
900 g approx.
Accessories
ø6
ø0.236
-4 air tube joint: 1 pc., Seal cap: 1 pc., Head mounting bracket (mounted at the factory)
Notes: 1) Typical value in condition of discharge distance 50 mm
1.969 in
, center of the product, discharge frequency 50 Hz and air supply 60 ℓ/min.(0.3 MPa).
2)
Typical value in condition of discharge distance 100 mm
3.937 in
(
ER-X001
: 50 mm
1.969 in
), center of the product, discharge frequency 50 Hz (
ER-X□HC
: 30 Hz) and no air supply.
3) Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature
change is less than ±10 °C, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.
4) The high-voltage cable is also available in lengths of 1 m
3.281 ft
and 2 m
6.562 ft
. The discharge frequency of 1 m
3.281 ft
/ 2 m
6.562 ft
cables is 50 /
30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.
5) The dried clean air is the air dried (dew point: equivalent of -20 °C
-4 °F
) and filtered (mesh-size: equivalent of 0.01 μm).
6) Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
7) Silicon needles (
ER-X016S
,
ER-X032S
and
ER-XANS
) are also available. For details, please contact our sales office.
8) Set the discharge frequency to 30 Hz. Do not use any other frequency.
9) Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.
SPECIFICATIONS
