8
Area Ionizer
ER-X
SERIES
Appearance
Model No.
Description
ER-XCCJ2H
Length: 2 m
6.562 ft
, Net weight: 120 g approx.
Cabtyre cable with
both connector
ER-XCCJ5H
Length: 5 m
16.404 ft
, Net weight: 290 g approx.
ER-XCCJ10H
(Note)
Length: 10 m
32.808 ft
, Net weight: 560 g approx.
Note: Cannot be used with the high and low temperature resistant type head
ER-X□HC
.
ORDER GUIDE
Controller
Please order power cable or AC adapter separately.
Head connection cables
Head connection cable is not supplied with the head. Please order it separately.
Type
Appearance
Model No.
Number of heads
connected
Output
Standard
type
ER-XC02
Max. 2 units
PhotoMOS relay
OPTIONS
Designation
Model No.
Description
Power cable
ER-XCC2
Length: 2 m
6.562 ft
Net weight: 80 g approx.
0.15 mm
2
10-core cabtyre cable
with connector
Cable outer diameter: ø5.3 mm
ø0.209 in
ER-XCC5
Length: 5 m
16.404 ft
Net weight: 190 g approx.
AC adapter
ER-XAPS-EX
IN: 100-240 V AC, 50/60 Hz
OUT: 24 V DC, 1.5 A
Ambient temperature: 0 to +40 °C
+32 to +104 °F
Cable length between connector and AC adaptor: 1.8 m
5.905 ft
Ground wire: 3.7 m
12.139 ft
AC cable: 1 pc., Cable length 1.8 m
5.906 ft
, Rating 125 V AC (Note 1)
Wiring connector terminals: 6 pcs.
ER-XAPS
AC cable
CN-ACCN-C2
AC cable (conforming to CCC), Length: 2 m
6.562 ft
CN-ACKR-C2
AC cable (conforming to KTL), Length: 2 m
6.562 ft
Discharge
needle unit
ER-XANT
For
ER-X016/X032/X048/X064
. (Note 2)
Unit with replacement tungsten needles: 1 pc.
ER-XANT1
For
ER-X001
.
Unit with replacement tungsten needles: 1 pc.
ER-XANT2
For
ER-X008
. (Note 2)
Unit with replacement tungsten needles: 1 pc.
ER-XANTHC
For
ER-X016HC/X032HC/X048HC/X064HC
.
Unit with replacement tungsten needles: 1 pc.
ER-XANT2HC
For
ER-X008HC
.
Unit with replacement tungsten needles: 1 pc.
Discharge part
protective cover
ER-XACVR
For
ER-X016/X032/X048/X064
. (Note 2)
Enables to prevent electric shock by mounting to the heads.
2 pcs. per set. (Note 3)
Material: Polycarbonate, Weight: 20 g approx. (1 set)
* No effect on charge removal capacity of the heads by mounting a
discharge part protection cover
Notes: 1) Rating of the AC cable is 125 V AC. If the voltage used exceeds 125 V AC, prepare a proper cable
by yourself or purchase our optional cable
CN-ACCN-C2
or
CN-ACKR-C2
. And, the AC cable is
not enclosed with
ER-XAPS-EX
.
2) Cannot be used with the high and low temperature resistanttype head
ER-X□HC
.
3) The number of set(s) you need depends on the head model No.
Model No.
ER-X016 ER-X032 ER-X048 ER-X064
No. of set
(2 pcs per set)
1 set
2 sets
3 sets
4 sets
Discharge needle unit
ER-XANT
ER-XANTHC
Power cable
ER-XCC□
Discharge part protective cover
ER-XACVR
ER-XANT1
ER-XANT2
ER-XANT2HC
AC adapter
ER-XAPS
ER-XAPS-EX
