Panasonic EB-G450, Техническое руководство

Страница: 6 / 42

http://cxema.ru
2 INTERFACES AND TEST POINTS
2.1 Introduction
This section provides details on connections between the RF and Baseband PCB and other interfaces on G450.
2.2 Interfaces
2.2.1 Baseband and RF
This details the 50way connector between the RF and baseband PCB.
PIN Signal Direction Description
1 RX_AUDIO RF to Baseband Receive audio
2 TX_AUDIO Baseband to RF Transmit audio
3 A_GND Audio ground
4 LO_EN RF to Baseband RF timing signal
5 BUZZ RF to Baseband Buzzer driver
6 SERIAL_RX Baseband to RF Serial data receive
7 SERIAL_TX RF to Baseband Serial data transmit
8 HF_ON RF to Baseband HF power control
9 nADP_DETECT Baseband to RF Data adaptor detect
10 nHF_DETECT Baseband to RF Handsfree detect
11 IGNITION Baseband to RF Ignition
12 nRADIO_MUTE RF to Baseband Radio mute
13 nLOGIC_POWER RF to Baseband Logic power
14 CHARGE_ON Baseband to RF Enable charging
15 EXT PWR Baseband to RF External power
16 PA_LOW RF to Baseband
RF control signal (indicated low power output from PA –
notused)
17 BAT_TEMP Baseband to RF Battery temperature
18 VBATT Battery input
19 GND Ground
20 GND Ground
21 nON_HOOK Baseband to RF On hook
22 SIM_5V RF to Baseband SIM 5v power
MCUK971001G8 Section 2 Issue 1
Technical Guide 2 - 1 Revision 0
INTERFACES AND TEST POINTS