Panasonic EA-7HW02AP1, Руководство пользователя

Страница: 54 / 62

54
3.6. Alarm display by self-test
This product will automatically perform self-test upon the start-up. If an error is detected, the detected alarm will be
indicated by the LED display on the product. When an error is detected on the self-test, turn off the power and
contact the dealer from whom you purchased this product.
EA-7HW03AP1 Self-test alarm display
Notice
•
As the test of LED, all LEDs except the LINK LED will light. After that, all LEDs except the LINK LED will be off
until the self-test finishes. Refer to "1.3 Major operating controls and their functions" for descriptions of LED
display when the self-test completed correctly.
•
When started up by turning on the INIT switch (initialized state), the ACT LED will start blinking.
•
The status of ETH1 LED/ETH2 LED will change according to the connection status of Ethernet (power supply
state),
Alarm type ACT 2.4G 5G ETH1 ETH2
FROM check error Lights red Off Off - -
RAM check error Lights red Off Off - -
Manufacturing number
error
Blinks red Off Off
- -
MAC address error Blinks red Off Off - -