12.2 Display messages
12.2.1 General messages
To indicate the unit’s status, one or more of the following messages will appear on the display.
Display
Cause & Solution
“
CALL SERVICE
”
R
There is something wrong with the unit. Contact our service personnel.
“
CHANGE DRUM
”
R
There is something wrong with the drum cartridge. Replace the drum
cartridge.
“
CHANGE TONER
”
R
The toner cartridge is not inserted properly. Re-insert it correctly (page 17).
R
There is something wrong with the toner cartridge. Replace the toner
cartridge.
“
CHECK CARTRIDGE
”
R
The toner cartridge or drum cartridge is not inserted properly. Re-insert it
correctly (page 17).
“
CHECK DOCUMENT
”
R
The document was not fed into the unit properly. Remove the document,
and then press
MwN
to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers
(page 129) and try again.
R
The ADF top cover is not fully closed. Push firmly on the front and rear edges
of the ADF top cover, and then feed the document again.
“
CHECK PAPER TRAY #1
”
R
The loaded recording paper is not the appropriate size. Load recording
paper of the size that is shown on the display.
R
If this message is often displayed, also change the recording paper size
setting (feature #380 on page 71).
R
The recording paper size setting (feature #380 on page 71) is set to
“
A5
”
,
“
B5(ISO)
”
,
“
B5(JIS)
”
or
“
16K
”
, so received faxes will have been stored
into memory. Change the recording paper size setting and load the
appropriate recording paper.
Note:
R
“
#1
”
: Check the standard input tray. The displayed paper size depends on
the recording paper size setting (feature #380 on page 71).
R
“
#2
”
: Check the multi-purpose tray. The displayed paper size depends on
the recording paper size setting (feature #381 on page 71).
R
“
#3
”
: Check the lower input tray. The displayed paper size depends on the
recording paper size setting (feature #382 on page 72).
“
CHECK INSTALL INPUT
TRAY #1
”
R
The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
Note:
R
“
#1
”
: Standard input tray
“
CHECK PICK UP INPUT
TRAY #1
”
R
Recording paper was not fed into the unit properly. Re-insert the recording
paper.
R
If misfeeding occurs frequently, clean the pickup rollers (page 130) and try
again.
Note:
R
“
#1
”
: Standard input tray (page 31)
R
“
#2
”
: Multi-purpose tray (page 32)
R
“
#3
”
“
CHECK REAR COVER
”
R
The rear cover is open. Close it.
“
COOL DOWN FUSER PLEASE
WAIT
”
R
The unit is cooling down the fuser unit. Wait for a while.
105
12. Help
Содержание DP-MB311EU
Страница 144: ...PNQX7191ZA D0215HH0 ...