Panasonic DP-6000, Руководство по эксплуатации

Страница: 98 / 270

4-12 Interrupting a Copy Job
75
Basic Features
4
You can interrupt a copy job that is in progress for an urgent job. Once the
urgent job is done, the copier will resume the interrupted copy job.
Interrupting a copy job cannot be carried out under the conditions below:
• When documents are being scanned in the DADF.
• When documents are being scanned on the document glass up to
selection of End Job.
Procedure
Press Interrupt.
The indicator light at the top left of the Interrupt button lights up indicating that
the current copy job has been interrupted.
Load the documents of the interrupting job.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The interrupting job starts.
After the interrupting job has ended, press Interrupt.
The indicator light at the top left of the Interrupt button is off indicating that the
interrupt mode has been cancelled.
Press Start.
The interrupted job resumes.
Interrupting a Copy Job
Interrupting job is up to 200 sheets
for one sided documents and 100
sheets for two sided documents.
The Interrupt feature cannot be used
when two jobs are programmed by
using the Program Ahead feature.