manualshive.com logo in svg

Panasonic DP-6000, Руководство по эксплуатации, Страница: 223 / 270

Поделиться
Скачать
Panasonic DP-6000 Скачать руководство пользователя страница 223

8-4  Replacing the Toner Cartridge

200

Daily Care

8

The toner cartridge contains toner that decreases each time a copy is made.
When it is time for the toner cartridge to be replaced, the following
messages will be shown on the message area of the display.  In this case,
follow the instructions to replace the toner cartridge.

Never throw a toner cartridge into an open flame.  It can
cause an explosion and you can get burnt.

Use Panasonic-recommended toner cartridges as non-
recommended ones may affect quality and performance of
the machine.

Procedure

Check that the machine
has stopped and open the
front door.

Replacing the Toner Cartridge

Do not place the used toner
cartridge which has just been
removed directly on the floor
because toner still remaining in the
cartridge may spill and dirty the floor.
You are recommended to spread
some paper on the floor before you
remove the cartridge.
Contact your local authorized
Panasonic servive representative for
disposal of used toner cartridges.

Содержание DP-6000















































































































































































































































































Отзывы:

Нет отзывов