Panasonic DMRE500H - DVD RECORDER DECK, Руководство по эксплуатации

Страница: 24 / 160

24
RQT7751
Reco
rd
in
g
Recording television programmes
[HDD] [RAM] [DVD-R]
≥
It is not possible to record to both HDD (Hard disk drive) and DVD
drive simultaneously.
≥
You can record up to 500 titles on HDD, 99 titles on one disc.
≥
It is not possible to record continuously from one side of a double sided
disc to the other. You will need to eject the disc and turn it over.
≥
When using 8 cm DVD-RAM, remove the disc from the cartridge.
≥
It is not possible to record digital broadcasts that allow “One time
only recording” onto DVD-R or 2.8 GB DVD-RAM discs.
≥
It is not possible to record directly onto a card. To set the
simultaneous MPEG4 recording function (
➡
below)
1
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD indicator lights up on the unit.
2
If you selected the DVD drive
Press [
<
OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
≥
Press the button again to close the tray.
3
Press [
W X
CH] to select the channel.
To select with the numbered buttons:
4
Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
≥
To record sound using LPCM (XP mode only):
Set the “Audio Mode for XP Recording” to “LPCM” in the
SETUP menu (
➡
page 64).
5
Press [
¥
REC] to start recording.
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
≥
You cannot change the channel or recording mode during
recording.
≥
[HDD] [RAM]
You can change the audio being received by
pressing [AUDIO] during recording. (Does not affect the
recording of audio.)
∫
To pause recording
Press [
;
].
Press again to restart recording.
(Title is not split into separate titles.)
∫
To stop recording
Press [
∫
].
From the start to the end of the recording is called one title.
[HDD]
When continuously recording for long durations, titles are
automatically divided every 8 hours.
[DVD-R]
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
∫
Simultaneous MPEG4 recording
[HDD]
If you set “MPEG4 Rec Mode” “XF”, “SF”, “F”, “N” or “E” before
recording to the HDD, programmes that are recorded as video
titles will be simultaneously recorded in MPEG4 format. You can
transfer (dub) these MPEG4 titles to a SD Memory Card or
MultiMediaCard quickly (
➡
page 54).
Digital broadcasts that allow “One time only recording”
cannot be recorded as a MPEG4 title.
Prior to recording to the HDD
1
Set the picture quality of the MPEG4 data to be recorded in
“MPEG4 Rec Mode” in the SETUP menu (
➡
page 63).
2
Set the capacity of the card you are using in “SD CARD
capacity” in the SETUP menu (
➡
page 63).
≥
When recording bilingual broadcasts, only the audio selected in
“Bilingual Audio Selection” (
➡
page 64) is recorded (“M 1” or
“M 2”).
[Note]
≥
The audio for MPEG4 is monaural and the aspect ratio of the
recorded picture is 4:3.
≥
You cannot use the simultaneous MPEG4 recording function
while transferring (dubbing) or “DV automatic recording”.
≥
When recording a programme without recording limits after
recording programmes with recording limits, the first 10 seconds
or so of the MPEG4 title may not be recorded.
When recording to DVD-R
≥
When recording bilingual broadcasts, only the audio selected in
“Bilingual Audio Selection” (
➡
page 64) is recorded (“M 1” or “M 2”).
≥
In order to play a DVD-R recorded using this unit on another
playback source, the disc must first be finalized (
➡
page 61).
VOLUME
CH
DIRECT TV REC
DVD
TV
AV
1 2 3
4 5 6
7 8
0
9
MANUAL SKIP
ShowView
CH
CANCEL INPUT SELECT
SKIP
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
CREATE
CHAPTER
TIMER
EXT LINK
PROG/CHECK
REC MODE ERASE REC
AUDIO
TIME SLIP STATUS DISPLAY
F
A B C
DUBBING
HDD DVD SD/PC
3
,
4
,
2
,
1
ENTER
¥
DIRECT
TV REC
INPUT SELECT
STATUS
DIRECT
NAVIGATOR
F
TIMER
∫
;
1
FUNCTIONS
RETURN
TIME SLIP
AUDIO
5
3
1
4
HDD DVD SD PC
HDD DVD
TIME SLIP DRIVE SELECT / x 1.3
OPEN/CLOSE
PC CARD
EJECT
SD CARD
CH REC TIME SLIP
2
1
5
TIME SLIP
∫ 1
3
HDD, DVD indicator
Numbered
buttons
Time Slip indicator
HDD, DVD indicator
When transferring (dubbing) in high speed mode to DVD-R
after you have recorded to the HDD.
When transferring (dubbing) a title using the high speed mode to a
DVD-R, set “DVD-R Rec for High Speed mode” to “On” before
recording to the HDD (
➡
page 63).
However, the following restrictions apply.
≥
When recording bilingual broadcasts, only the audio selected in
“Bilingual Audio Selection” (
➡
page 64) is recorded (“M 1” or
“M 2”).
≥
Even 16:9 aspect (Widescreen) programmes are recorded in 4:3
aspect.
≥
Even if “Hybrid VBR Resolution” is set to “Automatic”, it changes
to “Fixed” automatically, and the “Automatic” setting does not
work (
➡
page 63).
e.g., 5: [0]
➡
[5]
15: [1]
➡
[5]
Insert with the arrow facing in.
Insert fully so it clicks into place.
Insert label-up.
HDD
EXT Link
SD PC XP XP XP
SP
LP LP LP
EP EP EP
REC
PLAY
HDD
EXT Link
SD PC XP
SP
LP
EP
REC
PLAY
Remaining
time on the
disc
HDD
EXT EXT Link Link
XP
SP SP SP
LP LP
EP EP
REC
PLAY PLAY PLA
24
7551-EN.book 24 ページ ２００４年８月２６日 木曜日 午後４時３４分