Co
nve
n
ien
t func
tions
VQT2J62
82
Changing the unit’s settings
∫
Standby Settings
¾
Power Save in Standby
≥
If the clock has not been set, “Power Save in Standby”
is activated at all hours.
≥
This function cannot be enabled when the DLNA
function is enabled in "Home Network ( DLNA )
Settings" or "Server ( DLNA ) Settings". (
>
81)
¾
Automatic Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be
turned off once the set time has passed.
¾
Automatic Standby after OTR
If “On” is selected, this unit is turned to standby mode
when this unit is not operated for approximately
5 minutes after completing One Touch Recording
(
>
26).
¾
Automatic Standby after Copy
If “On” is selected, this unit is turned to standby mode
when this unit is not operated for approximately
5 minutes after completing copy (
>
45).
∫
Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥
Use “DVD 1”, the factory set code, under normal
circumstances.
1
Select the code, then press [OK].
To change the code on the remote control
2
While pressing [OK], press and hold the numbered
button ([1] to [6]) for more than 5 seconds.
3
Press and hold [OK] for more than 5 seconds.
4
Press [OK].
≥
Operation is possible only with Panasonic remote controls
with “IR6” printed at the bottom when the remote control
code of this unit is set to “DVD 4”, “DVD 5” or “DVD 6”.
∫
Clock
If the time is not set correctly, use the settings listed in
the method below.
≥
Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to “Off” and
perform “Manual Setting”.
≥
Region Selection
Select the region where you live to adjust the standard
time.
≥
The time contained in the broadcast signal is UTC
(Universal time, coordinated).
≥
Daylight Saving Time
Select time offset from the standard time for Summer
Time.
≥
If there is a gap between displayed time and actual
time, set this function.
≥
Manual Setting
1
Select “Off” of “Automatic”, then press [OK].
2
Select the item you want to change.
3
Change the setting.
4
Press [OK] when you have finished the settings.
∫
PIN Entry
You can set/change the PIN. (
>
74)
Others
On
It will go into the Power Save in Standby
mode.
On Timer
“Power Save in Standby” is activated
when the set time comes.
Off
It is possible to start quickly from the
standby mode. (Quick Start mode)
DVD
IR6
DVD
IR6
IR6
Clock
Time
Date
Daylight Saving Time
Region Selection
Automatic
Please set the clock.
OK: access RETURN: leave
OK
RETURN
0
00
10
NSW / ACT
Automatic
On
1
1
2010
DMRXW480&380GL-VQT2J62_eng.book 82 ページ 2010年2月19日 金曜日 午後5時2分