Panasonic DMR-UBS80EG, Руководство по обслуживанию

Страница: 39 / 93

39
7 Service Mode
7.1. Self-Diagnosis and Special Mode Setting
7.1.1. Self-Diagnosis Functions
Self-Diagnosis Function provides information for errors to service personnel by "Self-Diagnosis Display" when any error has
occurred.
U**, H** and F** are stored in memory and held.
You can check latest error code by transmitting [0] [1] of Remote Control in Service Mode.
Automatic Display on FL will be cancelled when the power is turned off or AC input is turned off during self-diagnosis display is ON.
Remote Control:
[R] = [RED]
[Y] = [YELLOW]
[B] = [BLUE]
Error Code Diagnosis contents Description Monitor Display Automatic FL display
U50 Short circuit for Antenna
(LNBIN 1 and LNB IN 2) is
detected The terminal, antenna cable or dish is
short-circuit as for both LNB IN 1 and LNB
IN 2. Check the connection status. No display
U50 1 Short circuit for Antenna
(LNBIN 1) is detected The terminal, antenna cable or dish is
short-circuit as for LNB IN 1. Check the
connection status. No display
U50 2 Short circuit for Antenna
(LNBIN 2) is detected The terminal, antenna cable or dish is
short-circuit as for LNB IN 2. Check the
connection status. No display
U59 Abnormal inner temperature
detected Display appears when internal temperature
of deck reaches limit temperature.
The power is turned off forcibly.
For 30 minutes after this, all key entries are
disabled. (Fan motor operates at the
highest speed for the first 5 minutes. For
the remaining 25 minutes, fan motor is also
stopped.) The event is saved in memory as
well. No display
U59 is displayed for 30 minutes.
U61 The unit is carrying out its
recovery process.
(with no disc in the disc tray) • The unit detected an error while
recording or playing with no disc in the
disc tray . The unit is carrying out its
recovery process. This process restores
the unit to normal operation. The unit is
not broken.
Wait until the message disappears.
No display
U71 HDMI incompatible error
(HDCP incompatible) Display this error when the equipment
(compatible with DVI such as TV, amplifier
etc.) connected to the unit by HDMI is
incompatible with HDCP.
*HDCP=High-bandwidth Digital Content
Protection No display
U72 HDMI connection error
(communication error) This error is displayed when there are any
communication problems with the unit and
the equipments (TV, amplifier etc.)
connected to the unit by HDMI. (or when
there is a problem with the HDMI cable) No display
U72 display disappears when error
has been solved by Power OFF/ON
of connecting equipment or by
inserting/removing of HDMI cable.
U73 HDMI connection error
(authentication error) When authentication error occurs while the
equipments (TV, amplifier etc.) are
connected by HDMI. (or when there is a
problem with the HDMI cable) No display
U73 display disappears when error
has been solved by Power OFF/ON
of connecting equipment or by
inserting/removing of HDMI cable.