Panasonic DMR-UBS80EG Скачать руководство пользователя | Manualshive

Страница: 10 / 93

background image

10

8. When the registering is complete, message screen appears.

Press [OK].

9. The confirmation screen appears.

Press [OK].

3.1.3.2.

Settings for USB-HDD

Delete all titles

Delete all titles on the USB-HDD.
- Delete does not work if one or more titles are protected.

1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Management", then press and hold [OK] for 3 seconds.
7. Select "Delete all titles", then press [OK].
8. Select "Yes" and press [OK].
9. Select "Start" and press [OK].

10. The confirmation screen appears.

Press [OK].

Format USB-HDD

Formatting deletes all contents, and they cannot be restored.
Check carefully before proceeding.

1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "USB-HDD Management", then press and hold [OK] for 3 seconds.
7. Select "Format USB-HDD", then press [OK].
8. Select "Yes" and press [OK].
9. Select "Start" and press [OK]. Then formatting starts.

10. Press [OK] after formatting completed.

3.1.3.3.

To cancell all USB-HDD registrations

• If you register a USB-HDD, all the content already recorded on the USB-HDD will be deleted.
• It is not possible to play back the content on the USB-HDD whose registration has been cancelled.
• You can check the registration number of the USB-HDD on the DIRECT NAVIGATOR.

Cancellation of all USB-HDD Registrations

This function cancells the registrations of all the USB-HDDs registered on this unit.
Only do this if you are going to dispose of this unit.
- Before operation, perform "3.1.2. Disconnecting the USB-HDD" and remove the USB-HDD.
- It is not possible to play back the content from a USB-HDD whose registration has been cancelled.

1. Press [FUNCTION MENU].
2. Select "Setup" in "FUNCTION MENU", then press [OK].
3. Select "Basic Settings" in "Setup (Adjustment for Recorder functions.)", then press [OK].
4. Select "HDD/ Disc/ USB-HDD" in "Basic Settings", then press [OK].
5. Select "Settings for USB-HDD" in "HDD/ Disc/ USB-HDD", then press [OK].
6. Select "Cancellation of all USB-HDD Registrations", then press and hold [OK] for 3 seconds.
7. Select "Yes", then press [OK].
8. The confirmation screen appears.

Select "Yes", and press [OK].

9. When the cancellation is complete, message screen appears.

Press [OK].

«
...
8
9
10
11
12
...
»

Содержание DMR-UBS80EG






























































































Отзывы:

Нет отзывов

Похожие инструкции для DMR-UBS80EG

YP-20T - YEPP Digital Player

Бренд: Samsung Страницы: 51

Бренд: Tascam Страницы: 3

Бренд: Yamaha Страницы: 4

CD S2000 - SACD Player

Бренд: Yamaha Страницы: 30

Бренд: Yamaha Страницы: 4

Бренд: Farenheit Страницы: 30

EZ season MX-110D

Бренд: FUNAI Страницы: 35

Бренд: Astell & Kern Страницы: 56

Бренд: LEXIBOOK Страницы: 66

Бренд: Sylvania Страницы: 1

Бренд: Systemline Страницы: 24

Бренд: Gemini Страницы: 16

Бренд: IAdea Страницы: 9

Бренд: Kobian Страницы: 84

Бренд: LEXIBOOK Страницы: 112

Бренд: AEG Страницы: 62

Бренд: AEG Страницы: 40

Бренд: AEG Страницы: 159

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды