background image

46

Item

FL display

Key operation

Mode name

Description

Front Key

Demonstration lock/
unlock

Ejection of the disc is prohibited.
The lock setting is effective until unlocking 
the tray and not released by "Main unit 
initialization" of service mode.

*When lock the tray.
1. 

2.

3. 

4. 

"LOCK" is displayed for 3 seconds.

1. While the unit is on, press and 
hold [OK], [B] and [Y] on the remote 
control at the same time for more 
than 5 seconds.
- "00 RET" is displayed on the unit's 
display.
2. Repeatedly press [ 

 ] on the 

remote control or [POWER] on the 
unit until "04 PRG" is displayed on 
the unit's display.
3. Press and hold [STOP] on the 
remote control until "10 OCL" is 
displayed on the unit's display.
4. Press [OK] on the remote control 
or [OPEN/CLOSE] on the unit.

*When unlock the tray.
1. 

2.

3. 

4. 

"UNLOCK" is displayed for 3 
seconds.

1. When the power is on, disc is in 
tray, press and hold [OK], [B] and 
[Y] on the remote control at the 
same time for more than 5 seconds. 
- "00 RET" is displayed on the unit's 
display.
2.Repeatedly press [ 

 ] on the 

remote control or [POWER] on the 
unit until "04 PRG" is displayed on 
the unit's display.
3. Press and hold [STOP] on the 
remote control until "10 OCL" is 
displayed on the unit's display.
4. Press [OK] on the remote control 
or [OPEN/CLOSE] on the unit.

*When press [OPEN/CLOSE] key 
while the tray being locked.

Display "LOCK" for 3 seconds.

Press [OPEN/CLOSE] key while the 
tray is being locked.

Progressive initialization The progressive setting is initialized to 

Interlace.

1. 

2.

1. When the power is on, press and 
hold [OK], [B] and [Y] on the remote 
control at the same time for more 
than 5 seconds. 
- "00 RET" is displayed on the unit's 
display.
2. Repeatedly press [ 

 ] on the 

remote control or [POWER] on the 
unit until "04 PRG" is displayed on 
the unit's display.
3. Press and hold [OK] on the 
remote control or [OPEN/CLOSE] 
on the unit.

Содержание DMR-UBS80EG






























































































Отзывы: