VQT2J51
69
Sound and Display Settings
3
,
4
select “Sound”
>
1
>
3
,
4
select item
>
§
Incorrect settings can cause noise to be output which can be harmful
to your ears and speakers, and audio will not be recorded properly
on media such as mini discs.
Refer to the operating instructions for connected devices to verify
whether or not they can decode each of the audio formats.
3
,
4
select “Display”
>
1
>
3
,
4
select item
>
>
Others
>
Setup
(
>
66, Accessing the Setup Menu)
All factory default settings are indicated with “Underlined” text.
Sound
Dynamic Range Compression
[DVD-V]
(Dolby Digital only)
Change the dynamic range (
>
92) for easier listening in low volume.
[On]
[Off]
Digital Audio Output
Change the settings when you have connected equipment through the
unit’s Digital Audio Out terminal (
>
76).
Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96kHz.
Signals are converted to 48 kHz despite the above settings if the
signals have a sampling frequency of over 96 kHz, or the disc has
copy protection.
[On]
Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with sampling
frequency of 96 kHz.)
[Off]
Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
Dolby Digital
§
Choose whether to output by “Bitstream”, which processes Dolby
Digital signals on other connected equipment, or to convert the
signals to “PCM” (2ch) on the unit before output.
[Bitstream]
When connected to equipment with a built-in Dolby
Digital decoder.
[PCM]
When connected to equipment without a built-in Dolby
Digital decoder.
DTS
§
Choose whether to output by “Bitstream”, which processes DTS
signals on other connected equipment or to convert the signals to
“PCM” (2ch) on the unit before output.
[Bitstream]
When connected to equipment with a built-in DTS
decoder.
[PCM]
When connected to equipment without a built-in DTS
decoder.
MPEG
§
Choose whether to output by “Bitstream”, which processes MPEG
audio signals on other connected equipment or to convert the
signals to “PCM” (2ch) on the unit before output.
[Bitstream]
When connected to equipment with a built-in MPEG
decoder.
[PCM]
When connected to equipment without a built-in
MPEG decoder.
FUN
CT
ON
M
EN
U
OK
Setup
Picture
Sound
Display
Connection
Tuning
Others
Disc
Dynamic Range Compression
Off
Audio Mode for XP Recording
Dolby Digital
Digital Audio Output
RETURN
TAB
SELECT
VHS
Audio Mode for XP Recording
Choose the audio type when recording or copying with XP mode.
[Dolby Digital] (
>
92)
[LPCM] (
>
92)
≥
The picture quality of LPCM recordings may be lower than that of
normal XP mode recordings.
≥
The audio recording becomes Dolby Digital even if you selected
LPCM when using a recording mode other than XP.
Display
On-Screen Messages
Choose the approximate time until the digital channel information
screen (
>
48) disappears automatically.
The length of time the Control Panel (
>
47) is displayed can also be
changed, but “Off” does not work.
[Off]
The digital channel information is not displayed.
[3 sec.]
[5 sec.]
[7 sec.]
[10 sec.]
Unit’s Display
Changes the brightness of the unit’s display.
Regardless of the setting, when “Power Save in Standby” (
>
72) is
activated and this unit is turned off, the unit’s display is turned off.
[Bright]
[Dim]
New Channel Message
Set whether to display the confirmation message when a DVB
channel is added.
[Automatic]
When a new DVB channel is added the unit will be
informed automatically.
[Off]
The Channel Messages are not shown.
Screen Saver
[On]
When this unit is not operated for approximately 5 minutes
while the screen is being displayed, the screen saver is
displayed. To return to the previous screen, press [OK].
[Off]
FUNCTION MENU Display
[On]
When the unit is turned on, the FUNCTION MENU will be
displayed. (
>
45)
[Off]
OK
Setup
Picture
Sound
Display
Connection
Tuning
Others
RETURN
SELECT
TAB
Disc
Unit’s Display
On-Screen Messages
5 sec.
Bright
New Channel Message
Automatic
Screen Saver
On
FUNCTION MENU Display
Off
VHS
DMR-EZ49VEB_VQT2J51.book 69 ページ ２００９年１２月２１日 月曜日 午後５時４０分
