Panasonic DMP-B100EB, Руководство по обслуживанию

Страница: 20 / 54

20
7 Troubleshooting Guide
7.1.
Self-Diagnosis Functions
Self-Diagnosis Function provides information for errors to service personnel by “Self-Diagnosis Display” when any error has
occurred.
U**, H** and F** are stored in memory and held.
You can check latest error code by transmitting [0] [1] of Remote Controller in Service Mode.
In case of clear the self-diagnosis display, remove the battery pack and the AC adaptor from the main unit after the power of the
main unit is turned off.
Error Code Diagnosis contents Description LCD Display
U580 Battery supply current abnormality A problem has occurred with the battery pack. Consult
your dealer.
U581 Abnormal charge time on battery power The battery pack has been recharging but has failed to
recharge for some reason. Recharge again.
U582 Battery-powered temperature anomaly You are recharging in a location that is too hot or too cold.
Recharge at normal temperature [+5 to +35 °C (+41 to
+95 °F)].
U59 Abnormal inner temperature detected Display appears when drive temperature exceeds 70°C.
The power is turned off forcibly.
For 30 minutes after this, all key entries are disabled.
The event is saved in memory as well.
"U59" is displayed for 30 minutes.
U72 HDMI connection error
(communication error) This error is displayed when there are any communication
problems with the unit and the equipments (TV, amplifier
etc.) connected to the unit by HDMI. (or when there is a
problem with the HDMI cable).
The display disappears only when the connection is
released. Neither the button operation nor the passage of
the fixed time disappear the display.
U73 HDMI connection error
(authentication error) When authentication error occurs while the equipments
(TV, amplifier etc.) are connected by HDMI. (or when
there is a problem with the HDMI cable).
The display disappears only when the connection is
released. Neither the button operation nor the passage of
the fixed time disappear the display.
U76 Connection error This error is displayed when equipment such as TVs or
amplifiers connected to the unit with the HDMI cable do
not correspond to the copyright protection. (The BD/DVD
video where the copyright is protected cannot be played.)
U77 Illegal disc error This error is displayed when it becomes impossible to
reproduce because of copyright illegal information.
U88 Restoration is operation.
(When the disc is in the disc tray) This error is displayed when there is a disc in the disc tray
or abnormality is confirmed during playback. It is shown
that the restoration to return the main unit operation
normally is operating. It becomes possible to use as soon
as not the breakdown but the U88 display disappears.
Display for 30 seconds.
H19 No working Fun Motor Preserves the Error record in case the Fun Motor doesn't
work at the time of Power-On. No display
F00 No error information Initial setting for error code in memory
(Error code Initialization is possible with error code initial-
ization and main unit initialization.) Not automatic display. Press [0][1]
in service mode. (Remote control-
ler key)
F58 Drive hardware error When drive unit error is detected, the event is saved in
memory. Not automatic display. Press [0][1]
in service mode. (Remote control-
ler key)
F74 HDMI Device Key Communication
error This error is displayed when the information error is
occurred at HDMI device key loading.
F75 HDMI Device Key Loading error This error is displayed when the key of loaded is illegal at
HDMI device key loading.