Others
- 207 -
Using the Remote Shutter (optional)
If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake)
when using a tripod and you can keep the shutter pressed fully when taking pictures with
Burst Mode. The remote shutter works similar to the shutter button on the camera.
Firmly connect the remote shutter to
the [REMOTE] socket on the camera as
far as it will go.
Take a picture.
1
Press the button lightly to press halfway.
2
Press the button fully to take the picture.
(Press it as far as it will go.)
∫
About [LOCK] on the remote shutter
•
You can keep the shutter button pressed fully. This is
effective when taking pictures with Burst Mode
(P82)
.
•
While pressing the shutter button fully, slide it to the
[LOCK] side.
•
Slide it to the other side to cancel [LOCK].
Note
•
Always use a genuine Panasonic remote shutter (DMW-RSL1; optional).
•
You cannot operate the camera with the remote shutter in the following cases.
–
When the Sleep Mode is canceled
•
Record with Creative Motion Picture Mode when using for motion picture recording.
•
The remote shutter cannot be used while the stereo microphone (DMW-MS1; optional) is in
use.
MIC
REMOTE
