Wi-Fi
Send Images Stored in the Camera
VQT4T08
- 232 -
Select and send the images
■
[SINGLE] setting
Use cursor button to select the picture
Press [MENU/SET]
•Confirmation screen is displayed. If you select [Yes], the operation is
executed.
■
[MULTI] setting
Use cursor button to select the picture, and then press [DISP.] button to set
(repeat)
•The setting is canceled when [DISP.] button is pressed again.
Press [MENU/SET]
•Confirmation screen is displayed. If you select [Yes], the operation is
executed.
●
Images uploaded to the WEB Service cannot be displayed or deleted with this
camera. Check images by accessing the WEB Service with your smartphone/tablet or
computer.
●
If sending images fails, a report email outlining the failure will be sent to the email
address registered with “LUMIX CLUB”.
●
The number of pictures that can be sent by [MULTI] is limited.
●
Images may contain personal information that can be used to identify the user,
such as a title, the time and date when the images was taken, and the location
where the image was taken. Check this information before uploading images to
WEB services.
●
Panasonic assumes no responsibility for the damages resulting from the leakage,
loss, etc. of images uploaded on WEB services.
●
When uploading images to the WEB Service, do not delete images from this
camera, even after they have finished sending, until you have checked that
they have been properly uploaded to the WEB Service. Panasonic assumes no
responsibility for the damages resulting from the deletion of images stored in this
unit.
