39
9.5.3.
Insert the 3rd Lens Frame Unit
1. Insert the 3rd Lens Frame Unit as the drawing below
indicated.
(1) Restore the position to the state ("Tele" position) when
the 1st Lens Frame Unit is inserted.
(Align the each Groove of the Straight Frame and the
each Groove of the both Side Cam Frame Unit.)
(2) Align the metal part of the 3rd Lens Frame Unit with
the metal part of the 2nd Lens Frame Unit.
(3) Insert the each Cam Pin of the 3rd Lens Frame Unit
and Shutter Cam Pin in the each Groove of the Both
Side Cam Frame Unit and the Straight Frame.
2. Make the lens into a retracted position state. ("Wide"
position)
(Turn the 1st Lens Frame Unit and 3rd Lens Frame Unit in
the direction of arrow fully.)
9.5.4.
Insert the Fix Frame Unit
Note: (When Installing)
When using the Fix Frame Unit of service part, remove the
Master Flange Unit (used to prevent fall of the gear) and the
Relay Gear before assembling the Fix Frame Unit.
1. Align the Zoom Motor of the Fix Frame Unit with the
Shutter FPC, then put the each Cam Pin of the Both Side
Cam Frame Unit in the each Groove of Penetration Cam
Frame.
2. Insert the Relay Gear to the Fix Frame Unit.
Содержание DMC-TZ80EB
