Panasonic DMC-FZ8S Скачать руководство пользователя страница 15

Страница: 15 / 148

Preparation

VQT1B25

Charging the Battery
with the Charger

The battery is not charged when the
camera is shipped. Charge the battery
before use.

Insert the battery terminals and
attach the battery to the charger.

Connect the charger to the
electrical outlet.

• Charging starts when the [CHARGE]

indicator

lights green.

• Charging is complete when the

[CHARGE] indicator

turns off (after

about 120 minutes).

• If the [CHARGE] indicator blinks, refer

to P16.

Detach the battery after charging
is complete.

• After charging is completed, be sure to

disconnect the charger from the electrical
outlet.

• The battery becomes warm after using it

and during and after charging. The
camera also becomes warm during use.
This is not a malfunction.

• The battery will be exhausted if left for a

long period of time after being charged.
Recharge the battery when it is
exhausted.

• The battery can be charged even if it is

not fully discharged.

• Use the dedicated charger and battery.
• Charge the battery with the charger

indoors.

• Do not disassemble or modify the

charger.

DMC-FZ8_PP ENG.book 15 ページ２００６年１２月２６日　火曜日　午後４時２０分

Содержание DMC-FZ8S





















































































































































Результаты поиска

Содержание DMC-FZ8S

Отзывы:

Похожие инструкции для DMC-FZ8S

Бренды по названию

Популярные бренды

Panasonic DMC-FZ8S, Руководство по эксплуатации

Результаты поиска

Содержание DMC-FZ8S

Отзывы:

Похожие инструкции для DMC-FZ8S

Бренды по названию

Популярные бренды