Panasonic DMC-FZ8S, Руководство по эксплуатации

Страница: 51 / 148

Advanced (Recording pictures)
51
VQT1B25
Taking Pictures using
Burst Mode
1
Press and hold the burst mode
button.
2
Press
3
/
4
to select a mode.
• You can also use the single or burst
mode button to select.
3
Press [MENU/SET].
• You can also press the shutter
button halfway or press the center of
the joystick to finish.
• The menu screen disappears after
about 5 seconds. At this time, the
selected item is automatically set.
4
Take a picture.
• Hold down the shutter button fully to
activate the burst mode.
∫
Number of pictures recorded in burst
mode
¢
The burst speed is constant regardless
of the transfer speed of the card.
• The number of pictures indicated is when
the shutter speed is faster than 1/60 and
the flash is not activated.
• The burst speed (pictures/second) may
become slower depending on the
recording environment such as in dark
places or if the ISO sensitivity is high.
• If you take pictures in burst mode with the
built-in memory, it will take time to write
the picture data.
• In simple mode [ ], the settings become
as follows. [ ] appears on the left of the
screen. (P120)
– [
ENLARGE]:
/Max. 5 pictures
– [ 4
qk
6
q
/10
k
15cm]/[ E-MAIL]:
/Max. 7 pictures
• When the flash is activated, you can
take only 1 picture.
• When the burst mode setting is set to
Unlimited
– The burst speed becomes slower
halfway.
The exact timing of this
depends on the type of card, the picture
size and the quality.
– You can take pictures until the capacity
of the built-in memory or the card is full.
• The focus is fixed when the first picture is
taken.
BURST SHOOTING
SELECT SET
MENU
OFF
HIGH SPEED
LOW SPEED
UNLIMITED
or
Burst speed
(pictures/
second)
Number of recordable
pictures (pictures)
3
¢
max. 5 max. 7
2
¢
approx. 2
Depends on the
remaining capacity of the
built-in memory/card.
DMC-FZ8_PP ENG.book 51 ページ ２００６年１２月２６日 火曜日 午後４時２０分