Preparation
17
VQT1B25
Inserting and
Removing the Battery/
the Card (optional)
• Check that this unit is turned off.
• Close the flash.
• Prepare a card. (optional)
• You can record or play back pictures
on the built-in memory when you are
not using a card. (P18)
1
Slide the release lever in the
direction of arrow and open the
card/battery door.
• Always use genuine Panasonic
batteries (CGR-S006A).
• If you use other batteries, we cannot
guarantee the quality of this product.
2
Battery:
Insert it fully being careful about
the direction you insert it.
Pull the lever
A
in the direction of
the arrow to remove the battery.
Card:
Push it fully until it clicks being
careful about the direction you
insert it.
Push it until it clicks and then pull
it out upright.
• Do not touch the connection terminals
of the card.
• The card may be damaged if it is not
fully inserted.
3
1
Close the card/battery door.
2
Slide the release lever in the
direction of the arrow.
• If the card/battery door cannot be
completely closed, remove the card,
check its direction and then insert it
again.
• Remove the battery after use.
• Do not remove the card or the battery
while the card is being accessed. The
data may be damaged.
• Do not remove the battery with the
camera turned on since the settings on
the camera may not be stored properly.
• The supplied battery is designed only
for the camera. Do not use it with any
other equipment.
• Do not insert or remove the battery or
the card while this unit is turned on.
The data on the built-in memory or the
card may be damaged. Be particularly
careful while the built-in memory or the
card is being accessed. (P26)
• We recommend using Panasonic’s
card.
DMC-FZ8_PP ENG.book 17 ページ 2006年12月26日 火曜日 午後4時20分
Содержание DMC-FZ8S
Страница 146: ...146 VQT1B25 MEMO ...
Страница 147: ...147 VQT1B25 ...