Panasonic Digital Palmcoder PalmSight PV-DV100, Руководство по обслуживанию

Страница: 21 / 195

2-7
Fig. D16
Fig. D17
LCD C.B.A. 5
LCD Panel Unit 6
(L-2)
(L-2)
LCD Lamp
Unit
(L-2)
(L-2)
Lead Light Panel Unit
FP8003
Unsolder
Unsolder
When replacing the Lead Light Panel Unit , make sure
to remove Protection Sheet as shown below.
Use extreme care when handling the
Lead Light Panel
Unit and the LCD Panel Unit to avoid damage, dust,
and spots (especially fingerprints, etc.).
The use of clean cotton gloves when available is
highly recommended.
Be careful not to apply any pressure to Portion "a" and
"b" of the LCD Lamp Unit as shown below.
After replacing the Lead Light Panel Unit, confirm
that the Terminal of LCD Lamp Unit is soldered
correctly as shown below.
Note:
(1)
(2)
(3)
(4)
LCD C.B.A.
Terminal of
LCD Lamp Unit
Solder
Hole of
Lead Light
Panel Unit
1~1.4mm
Protection Sheet
LCD Lamp Unit
Portion "b"
Portion "a"
Lead Light Panel Unit
7 LCD Lamp Unit
LCD Lamp Unit
LCD Panel Holder
LCD Panel
Holder
LCD
Reflect
Sheet
LCD Reflect Sheet
Open
Lead Light Panel
(Lead Light Panel Unit)
Lead Light Panel
When installing the LCD Lamp Unit, confirm that the
LCD Lamp Unit is positioned as shown below.
Use extreme care when handling the
Lead Light Panel
and the LCD Sheet Unit to avoid damage, dust, and
spots (especially fingerprints, etc.).
Reassembly Note:
(1)
(2)
LCD Sheet
Unit
LCD
Sheet
Unit
(L-3)
(L-3)
View A
View A