Panasonic Digital Palmcoder PalmSight PV-DV100, Руководство по обслуживанию

Страница: 148 / 195

6-22
YES
Check IC302, IC303, IC304 and
surrounding parts on Main C.B.A.
NG
NO Use a new MultiMediaCard and
check MultiMediaCard operation. OK Multi Media Card is defective.
Use a new MultiMediaCard. Does the LCD Monitor or EVF
Monitor indicate the Error Code ?
The following Error Code appears on the LCD Monitor or EVR Monitor when an Error occurred.
Repair the Camcorder or Multi Media Card as follows.
Error Code
U11
Camera Microcontroller Error (1) Replace IC302 (Camera Microcontroller).
Error Description Possible Solution
7. Can not use Multi Media Card
U30
Error other than above Replace IC302 (Camera Microcontroller.)
U12
Communication Error between MultiMediaCard
and IC302 (Camera Microcontroller.) Check if FP302 connector is correctly connected.
If still NG, check MultiMediaCard.
If still NG, replace IC302 (Camera Microcontroller.)
U13
Camera Microcontroller Error (2) Replace IC302 (Camera Microcontroller).
U14
MultiMediaCard/Camcorder Dialog Error Check MultiMediaCard.
If still NG, replace IC302 (Camera Microcontroller.)
U15
No MultiMediaCard Memory Delete the data in MultiMediaCard which was
recorded by other compatible products.
OR
Use a new MultiMediaCard.
U16
Captured image (ctg folder) limit exceeded Delete the data in MultiMediaCard which was
recorded by other compatible products.
OR
Use a new MultiMediaCard.
U17
Captured image (JPEG file) limit exceeded Delete the data in MultiMediaCard which was
recorded by other compatible products.
OR
Use a new MultiMediaCard.