Convenient functions
VQT4E90
60
Registering the external HDD (USB HDD)
Convenient
functions
If you connect and register a USB HDD, you can
move the data in the built-in HDD to the
USB HDD, thus saving the capacity in the built-in
HDD.
If you use a USB HDD with this unit, the
USB HDD must first be registered on this unit.
• Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
• Up to eight USB HDDs can be registered on this
unit.
• Registered USB HDDs cannot be used with
devices other than this unit.
• Certain non-confirmed USB HDDs cannot be
used with this unit.
• If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
Connect this unit with optional USB HDD.
• Only one USB HDD can be connected at the
same time.
• Do not connect additional HDDs using a USB
hub.
• For details about connection method, refer to
the instructions supplied with the USB HDD.
Please use the following procedure to disconnect.
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1
Press [SETUP].
2
Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
3
Select “USB HDD Disconnection”, then
press [OK].
4
Select “Yes”, then press [OK].
5
Disconnect the USB HDD from this unit.
Regarding the external HDD (USB HDD)
Please use a confirmed USB HDD.
For the latest information on confirmed USB
HDDs, please check the following website.
http://panasonic.jp/support/global/cs/
Connecting the USB HDD
Disconnecting the USB HDD
This unit’s rear panel
e.g.,
USB HDD
DMR-PWT520&420EB_eng.book 60 ページ 2012年3月23日 金曜日 午後4時42分