Convenient functions
VQT4E90
81
Home Network Settings
You can set the DLNA (Server) function.
(
>
63)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
• If “On” is selected, “Power Save in
Standby” is fixed to “Off”. (
>
right)
• This cannot be set to “On” if the
connection with the wireless broadband
router is not encrypted in the wireless
connection.
Setting device name
It is also possible to change the name of
this unit on the network.
• Select from a preset list
Select the preset name, then press [OK].
• Create name
Enter the name.
Refer to “Entering text”. (
>
85)
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select “Yes”, then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select “Yes”, then press [OK].
• This function cannot be enabled when
“Automatic” is selected in “Registration type for
remote devices”. (
>
above)
• The maximum number of equipment that can be
registered is 16.
Others
Standby Settings
Power Save in Standby
• On:
It will go into the “Power Save in Standby”
mode.
• On Timer:
“Power Save in Standby” is activated when
the set time comes.
• If the clock has not been set, “Power Save
in Standby” is activated at all hours.
• Off:
It is possible to start quickly from standby
mode. (Quick Start mode)
• This function cannot be enabled when the DLNA
function is enabled in “Home Network function”. (
>
left)
• If “On” or “On Timer” is selected, “Unit’s Display” is fixed
to “Automatic”. (
>
78)
•
[PWT520]
The setting may be changed to “Off”
automatically when the setting for video
communication is changed. (
>
66)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When “REWIND LIVE TV” is set to “On”
(
>
75), “Off” cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (
>
28).
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (
>
59).
DMR-PWT520&420EB_eng.book 81 ページ ２０１２年３月２３日 金曜日 午後４時４２分
