70
VQT2J28
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
AV2 Settings
Set to match the connected equipment.
≥
Press [OK] to show the following settings.
AV2 Input
Set to “RGB / Video” or “RGB” when receiving or recording RGB
output from external equipment.
[RGB / Video]
[RGB]
[Video]
[S Video]
[For[France,[Italy,[Spain[and[Switzerland]
AV2 Connection
This setting is fixed with “Ext” if you set “TV System” to “NTSC”
(
>
69).
[Decoder]
When a decoder is connected to descramble the
scrambled signals (e.g., C+decoder).
[Ext]
When the VCR or a digital satellite receiver is
connected.
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (
>
69).
[Ext Link 1]
When a digital satellite receiver which transmits a
special control signal recordings via the 21-pin
Scart cable is connected.
Start and stop timings of recording are controlled
by the control signal.
[Ext Link 2]
When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
[For]Germany[and]Austria[
Active Antenna
[On]
Select this when you will use indoor antenna that is not
equipped with power supply.
[Off]
Others
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
[DVD 1]
[DVD 2]
[DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1
Press [
3
,
4
] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)
and press [OK].
To change the code on the remote control
2
While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3
Press [OK].
∫
When the following indicator appears on the
unit’s display
The unit’s remote control code
Change the code on the remote
control to match the main unit’s
(
>
step
2
).
Executing “Shipping Condition” in the Setup menu returns the main
unit code to “DVD 1”. Change the remote control code to 1
(
>
step
2
).
S
etup
Tuning
Remote Control
Press “
” and “OK” together
for more than 5 seconds on the remote
control.
Disc
Picture
Note
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly, use the settings listed
in the method below.
1
Press [
3
,
4
] to select “Off” of “Automatic” and press [OK].
2
Press [
2
,
1
] to select the item you want to change.
The items change as follows:
Hour
!#
Minute
!#
Second
!#
Day
!#
Month
!#
Year
^-----------------------------------------------------------------------------------------J
3
Press [
3
,
4
] to change the setting.
You can also use the numbered buttons for setting.
4
Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
[For[France,[Italy,[Spain[and[Switzerland]
∫
To change the time offset
When the time is not correct, set “Time offset” (from –2h to +2h).
1
Press [
3
,
4
] to select “On” of “Automatic” and press [OK] in
step
1
.
Auto clock setting starts. This takes a few minutes.
“Automatic clock setting completed.” screen is displayed.
2
Press [
1
].
3
Press [
3
,
4
] to select the correct time offset and press [OK].
4
Press [RETURN ].
Standby Settings
≥
Press [OK] to show the following settings.
Power Save in Standby
[On]
It will go into the Power Save in Standby mode
when the unit is in standby mode.
[Off]
It is possible to start quickly from the standby
mode. (Quick Start mode)
[On Timer]
“Power Save in Standby” is set to activate
during the setting time period. (
>
below)
1
Press [
3
,
4
] to select “On Timer” and press [OK].
2
Press [
3
,
4
] to set the start time (hour).
3
Press [
2
,
1
] to select the stop time and press [
3
,
4
] to
set the stop time (hour).
4
Press [OK] when you have finished the settings.
≥
You can also use the numbered buttons for setting.
≥
You can set start and stop time by the hour.
≥
If the clock has not been set, “Power Save in Standby” is
activated at all hours.
Clock
Automatic
Time
Date
Please set clock manually.
OK: store RETURN: leave
OK
RETURN
S
ELECT
CHANGE
Off
0
: 00 : 00 1 . 1 . 2010
0 9
Number
[For]Germany[and]Austria[
e.g., This screen appears
while receiving a digital
broadcast.
Clock
Time
Automatic
Time offset
Date
Auto
Please set clock manually.
OK: store RETURN: leave
OK
RETURN
S
ELECT
CHANGE
0
: 00 : 00 1 . 1 . 2010
Off
0 9
Number
[For[France,[Italy,[Spain[and[Switzerland]
Time offset
>
below
e.g., This screen appears
while receiving a digital
broadcast.
Note
Power Save in Standby
Power Save
On Timer
To
6 :00
From
0
:00
Saves standby power consumption
by disabling Quick Start function and
AV2 loop-through in standby. Unit's Display
is set to "Automatic".
Press OK to manually set the period of
Power Save.
0 9
Number
OK
RETURN
SELECT
CHANGE
DMREX83EG&EC-VQT2J28_eng.book 70 ページ ２０１０年１月１８日 月曜日 午後２時２９分
