10
VQT2J28
STEP
2
Channel reception settings and TV aspect settings
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [
Í
] to turn the unit on.
When connecting to a television that has the VIERA Link or Q
Link functions (
>
40), downloading from the television starts.
You can download the tuning positions from the television for
the channels in this unit’s channel coverage.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 5-10 minutes.
The features of the Power Save in Standby function when
the unit is in standby mode are as below.
§
1
“Unit’s Display” is set to “Automatic” in the Setup menu.
(
>
68)
§
2
It is possible to startup and start recording within several
seconds.
– Depending on the type of TV or the connected terminal, it
may take time to display the screen.
§
3
When “RF OUT ( Aerial Signal )” is set to “Off” in the
Setup menu (
>
71)
If the TV aspect setting screen appears on the
television.
Press [
3
,
4
] to select the TV aspect and press [OK].
≥
16:9:
When connected to a 16:9 widescreen television
≥
Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(
>
85).
≥
Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
(
>
85).
When television picture appears, set up is complete.
If the confirmation screen of GUIDE Plus+ data download
appears, perform the following steps.
(For information about GUIDE Plus+ system
>
11)
5
Press the numbered buttons or
[
3
,
4
,
2
,
1
] to enter your postal
code and press [OK].
GUIDE Plus+ data download starts. This takes about
30 minutes.
6
When the download has finished
Press [OK].
Set up is complete.
To stop partway
Press [RETURN ].
[For[France,[Italy,[Spain[and[Switzerland]
If the Country setting menu appears on the television.
Press [
3
,
4
] to select the country and press [OK].
[For]Germany[and]Austria[
The “Aktive Antenne” setting menu appears.
Press [
3
,
4
] to select “Ein” or “Aus” and press [OK].
When using indoor antenna that is not equipped with power
supply, select “Ein”.
If the Auto setup menu appears on the television.
Press [
3
,
4
] to select “Digitale & analoge Sender” or
“Digitale Sender” and press [OK].
≥
Digitale & analoge Sender
(Digital & Analogue channels):
Perform the analogue Auto-Setup after performing the DVB
Auto Setup.
≥
Digitale Sender (Digital channels):
Perform the DVB Auto Setup. (analogue Auto-Setup is not
performed)
“DVB Auto-Setup” starts.
3
Press [
3
,
4
] to select “Ein”, “Aus” or
“Zeitauswahl” and press [OK] when
the “Energiesparmodus” setting
menu appears.
Ein
(
On
)
:
It will go into the Power Save in Standby mode
when the unit is in standby mode.
Aus
(
Off
)
:
It is possible to start quickly from the standby mode.
(Quick Start mode)
Zeitauswahl (On Timer):
Press [
3
,
4
,
2
,
1
] to set the start and stop time
and then press [OK].
≥
“Energiesparmodus” is set to activate during the
setting time period.
MANUAL SKIP
STOP
PAUSE PLAY/x1.3
INPUT
SELECT
0
9
8
7
6
5
4
3
2
1
CH
CH
PAGE
SLOW/SEARCH
VOL
AV
DRIVE
SELECT
TV
STATUS
EXIT
OPTION
RETURN
DELETE
OK
DIR
ECT
NA
VIG
ATO
R
FUN
CTIO
N M
ENU
GUIDE
ShowView
PROG/CHECK
PAUSE LIVE TV
SKIP
OK
,
,
,
OK
0
9
8
7
6
5
4
3
2
1
RETURN
FUN
CTIO
N M
ENU
FUNCTION
MENU
Numbered
buttons
DVB Auto-
S
etup
S
uchlauf
Kan 5
69
Kanal
Qualität
S
endername
Typ
ABC
ABC 2
1
2
TV
Daten
9
9
Energiesparmodus
Energiesparmodus
Ein
Bis
6 :00
Von
0 :00
Minimiert
S
tromverbrauch im
S
tandby-Modus
Energiesparmodus
(Power Save in
Standby)
Activated (
Ein
/
Zeitauswahl)
§
1
Deactivated
(
Aus
)
Power consumption
Approx. 0.3 W
§
3
Approx. 12 W
Startup time
Not Quick
Quick
§
2
Watching the picture
(e.g. Pay TV) from the
device connected to AV2
Cannot do
Can do
4
Press [
2
,
1
] to select “Ja” and press
[OK].
∫
If the clock setting menu appears
Set the clock manually (
>
70).
∫
To confirm that stations have been tuned
correctly (
>
66)
∫
To restart set up (
>
65)
∫
Settings of the TV Guide for Analogue
broadcasts (
>
11)
[For]Germany[and]Austria[
On screen messages are displayed in German in the factory
preset. After completing step 6, change the on-screen display
to English in the following steps.
1
Press [FUNCTION MENU].
2
Press [
3
,
4
] to select “Weit. Funktionen” and press [OK].
3
Press [
3
,
4
] to select “Setup” and press [OK].
4
Press [
3
,
4
] to select “Display” and press [
1
].
5
Press [
3
,
4
] to select “Sprachauswahl” and press [OK].
6
Press [
3
,
4
] to select “English” and press [OK].
7
Press [EXIT].
Postleitzahl
Gewähltes Land : XXXXXX
Dieses Gerät aktualisiert die
GUIDE Plus+ Daten
mehrmals pro Tag.
CHANGE
DMREX83EG&EC-VQT2J28_eng.book 10 ページ ２０１０年１月１８日 月曜日 午後２時２９分
