69
VQT2J28
S
e
tt
ing m
e
nus
(All factory default settings are indicated with underlined text.)
Depending on the connected equipment, some items may be
shaded in grey on the display and cannot be selected, or you may
not be able to change the settings.
Connection
TV Aspect
Set to match the type of television connected.
[16:9]
When connected to a 16:9 widescreen television.
[Pan & Scan] When connected to a 4:3 aspect
television, side picture is trimmed
for 16:9 picture.
[Letterbox]
When connected to a 4:3 aspect
television. 16:9 picture is shown in
the letterbox style.
TV System
Change the setting to match the equipment you are connecting
with, or to match the title when there are both PAL and NTSC titles
on the HDD.
[PAL]
≥
Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as
PAL 60.
≥
Select to record television programmes and PAL input
from other equipment.
≥
[HDD]
Select when playing a PAL input title recorded on
the HDD.
[NTSC]
≥
Select when connecting to a NTSC television.
Television programmes cannot be recorded properly.
≥
Select to record NTSC input from other equipment.
≥
[HDD]
Select when playing a NTSC input title recorded
on the HDD.
≥
This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD.)
≥
If “NTSC” has been selected, the TV Guide system cannot be
used.
≥
During recording, timer recording standby or EXT LINK standby,
this unit cannot play discs that do not match the “TV System”
(PAL/NTSC) setting. Set “TV System” to match the discs before
playing them.
To change the setting all at once (PAL
!#
NTSC)
While stopped, keep pressing [
∫
] and [
<
OPEN/CLOSE] on the
main unit at the same time for 5 or more seconds.
Note
HDMI Settings
≥
Press [OK] to show the following settings.
HDMI Video Format
You can only select items compatible with the connected
equipment. This setting normally does not need to be changed.
However if you are concerned about output picture quality, it may
be improved by changing the setting.
≥
To enjoy High Quality Video up-converted to 1080p, you need
to connect the unit directly to 1080p compatible HDTV. If this
unit is connected to an HDTV through other equipment, it must
also be 1080p compatible.
[576i / 480i] [576p / 480p]
[720p]
[1080i]
[1080p]
When setting video output to “1080p”, we
recommend using High Speed HDMI Cables that
have the HDMI logo (as shown on the cover) and
are less than 5 meters to prevent video distortion
etc.
[Automatic] Automatically selects the output resolution best
suited to the connected television (1080p, 1080i,
720p, 576p / 480p or 576i / 480i).
Aspect for 4:3 Video
To play a 4:3 title when connected with an HDMI cable, set how
to show pictures on a 16:9 widescreen television.
[4:3]
Picture output expands left or right.
[16:9]
Picture is output as original aspect with
side panels.
Digital Audio Output
[HDMI and Optical]
[Optical Only]
Select when this unit is connected to an
amplifier with an optical digital audio cable and
connected to a TV with an HDMI cable and
you want to enjoy the highest quality of audio
from discs (
>
73).
VIERA Link
Set to use “HDAVI Control” function when connected with an
HDMI cable to a device that supports “HDAVI Control”.
[On]
[Off]
Select when you do not want to use “HDAVI Control”.
AV1 Output
Set according to the terminal of the connected TV.
If this unit is connected with an HDMI cable, you cannot select
“RGB 1” or “RGB 2”.
[For[France,[Italy,[Spain[and[Switzerland]
When a decoder is connected, do not set to “RGB 1”.
[Video]
Select when a TV that can receive a composite signal is
connected.
[S Video]
Select when a TV that can receive an S Video signal is
connected.
[RGB 1]
Select when a TV that can receive an RGB signal is connected. If
you always would like to view the picture from the unit in RGB
signal, select this mode. The TV screen will automatically switch
to display the picture from the unit when the unit is turned on.
[RGB 2]
Select when a TV that can receive an RGB signal is connected. If
you would like to switch to display the picture from the unit only
when playback or viewing menus, select this mode.
DMREX83EG&EC-VQT2J28_eng.book 69 ページ ２０１０年１月１８日 月曜日 午後２時２９分
