VQT2J34
83
On the Unit’s Display (Continued)
U80, U81, U99
≥
The unit fails to operate properly. Press [
Í
/I] on the main unit to switch the unit
to standby mode. Press [
Í
/I] on the main unit again to turn the unit on. If the
message persists, perform “DVB Auto Setup by Signal Quality” in the Setup
menu. (
>
71) or “Shipping Condition” (
>
76). If it remains displayed, consult
the dealer where the unit was purchased.
U88
≥
There was something unusual detected with the disc while recording, playing or
copying; there was a power failure or the AC mains lead was disconnected
while the unit was on. The unit is carrying out its recovery process. This
process restores the unit to normal operation. Wait until the message
disappears.
≥
If it remains displayed, consult the dealer where the unit was purchased.
X HOLD
≥
The Child Lock function is activated.
Press and hold [OK] and [RETURN ] at the same time until “X HOLD”
disappears. (
>
77)
On the TV
Cannot finish recording completely.
Copy-protect signal was detected.
≥
The programme was copy-protected.
Disc is full, or maximum number of titles
are recorded.
Cannot finish recording completely.
≥
The HDD or disc may be full.
≥
The maximum number of title has been exceeded. (
>
25)
≥
[HDD]
[RAM]
[-RW‹V›]
[+RW]
Create space by erasing unwanted titles. Even if you
erase recorded content from the DVD-R, DVD-R DL, +R or +R DL there is no
increase in disc space. Available recording space on a DVD-RW (DVD-Video
format) or +RW disc increases when the last title is deleted (space may
increase slightly when you delete other titles). (
>
23, 46, 68)
≥
Use a new disc.
Cannot record.
Maximum number of titles exceeded.
Cannot playback.
TV system is different from the setting.
To playback, please change the TV System
in Setup.
≥
You tried to play a title recorded using a different encoding system from that of
the TV system currently selected on the unit.
Alter the “TV System” setting on this unit to suit. (
>
74)
Cannot play on this unit.
≥
You tried to play a non-compatible image. (
>
17)
No Disc
≥
The disc is upside down. If it is a single-sided disc, insert it so the label is facing
up.
≥
Ensure the disc is flat in the tray
No folders.
≥
There is no compatible folder on the media. (
>
17)
Not enough space in the copy destination.
≥
Create space by deleting any unnecessary items. (
>
23, 46, 53, 68)
≥
Delete one or more items registered on the copy list to ensure that the
“Destination Capacity” is not exceeded. (
>
59, 62, 65)
This is a non-recordable disc.
≥
The disc may be dirty or scratched. (
>
7)
≥
The unit cannot record on the disc you inserted. Insert a DVD-RAM or
unfinalised DVD-R, DVD-RW (DVD-Video format), +R, or +RW disc. (
>
15)
≥
You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW disc.
Format the disc with the unit. (
>
68)
≥
You cannot directly record to a DVD-R DL and +R DL disc on this unit.
Record to the HDD and then copy to the disc.
Unable to format.
This disc is not formatted properly.
Format it using DVD Management
in FUNCTION MENU.
Not enough space on HDD.
Space of 4 hours ( in SP mode ) is
necessary.
Maximum number of titles is recorded on
HDD. Please delete unwanted titles.
≥
[-R]DL]
[+R]DL]
It is not possible to copy when there is not enough free space on
the HDD or when the total number of the recorded titles on the HDD and the
titles to be copied are greater than 499.
Delete unwanted titles from the HDD. (
>
23, 46, 68)
$
≥
The operation is prohibited by the unit or disc.
DMR-EX773EB_VQT2J34-B.book 83 ページ ２０１０年１月７日 木曜日 午後５時８分
