Panasonic DH-3PL1PH, Инструкции по эксплуатации и монтажу

Страница: 10 / 12

Main Body
Thread End
Shower
Hose
Rubber
Packing
Filter Body
Assembly
Shower Head
Parts not
included
Use flexible
pipe minimum
length 150 mm
①
Place Rubber Packing between Filter Body Assembly and Flexible Pipe.
Do not use Piping Tape. Tighten it by Spanner firmly.
②
Place Rubber Packing between Filter Body Assembly and Main Body.
Do not use Piping Tape. Tighten it by hand firmly.
③
Place Rubber Packing between Shower Hose and Main Body.
Do not use Piping Tape. Tighten it by hand firmly.
④
Place Rubber Packing between Shower Hose and Shower Head.
Do not use Piping Tape. Tighten it by hand firmly.
⑤
The Filter Body Assembly should be placed in the front direction of the Unit.
5. Piping installation procedure
NOTE:
* Make sure no water leaks from pipe connection.
* When glue is used for external piping connection, must wait for the glue
to dry before proceed to test run with water.
⑥
Adjust Holder Adjustment. (Behind Filter Body Assembly).
Set the Adjust Holder behind the Filter Body Assembly
by turning it anticlockwise or clockwise. Make sure the
Adjust Holder is touching to the wall or tiles.
If the Adjust Holder needs to be cut due to different wall
height make sure the Adjust Holder is touching to the wall
or tiles to prevent possibility of water leakage at the Filter
Body Assembly.
Touching to
the wall/tiles
wall/tiles
Touching to
the wall/tiles
tiles tiles
Cut
Adjust Holder About 5 mm
• The Unit must be earthed.
• Earth Rod fixing procedure. Select suitable place to bury the optional Earth Rod (DQ-6H) for at least 70 cm below ground surface.
• Ensure that the ground resistance is less than 100 Ω. If it is not, drive the Earth Rod deeper into ground surface or use 2 or 3 Earth Rods.
④
Earth Rod
The Unit must be earthed.
Improper grounding could cause electric shock.
WARNING
About 2 m About 2 m 1 m
Ground
Surface
(Parallel Style)
Earth Rod
70 cm at least
70 cm at least
Connection
Burying tool
(Bevel Style)
70 cm at least
Connection
②
③
④
①
- 10 -
Do not share the inlet or outlet pipe of Home Shower Unit
with other outlets.
The pressure may drop due to water being drawn off at other point.
The shower water temperature may become very hot.
Avoid using dirty water as it may affect heater performance
and other components.
WARNING
CAUTION
L N
WARNING
MUST BE TIGHTENED
1 N•m
Water Inlet
Water Outlet
Filter Body
Assembly
⑤
L N
WARNING
MUST BE
TIG
HTE
NE
D
1 N•m