manualshive.com logo in svg

Panasonic CU-B14DBE5, Руководство по обслуживанию

Поделиться
Скачать
Panasonic CU-B14DBE5 Скачать руководство пользователя страница 17

17

8 Operation Instructions

8.1.

Wired Remote Control

Name and function of each part

NOTES

• Ensure that the correct button is pressed as simultaneous pressing of the multiple buttons will not make the setting correct.
• The illustration above is for explanatory purposes only. The appearance will be different during actual operation.
• Do not operate the remote control with wet hands. Otherwise, electric shock or malfunction may occur.
• Do not press the remote control buttons with sharp object as this may damage the remote control.
• Buttons marked with * are not needed for normal operation. If one of these buttons is pressed by mistake, press the same button

once more to cancel the operation.

• When the power resumed after power failure, the unit will restart automatically with all the previous settings preserved by the

memory function. (Auto restart function)

REMOTE

The OFF/ON button cannot be used.

LOCAL

All wired remote control buttons can be used.

Time/time setting display

Check display

Fan speed display

Operation mode selection display

FILTER RESET display

(Appears after the cumulative running time reaches approxi-
mately 2,500 hours of operation.)

Temperature setting display (16

°

C - 31

°

C)

Airflow direction setting display

OFF/ON button

Used to start and stop the operation.

FAN SPEED button

Used to select the fan speed of high (HI), medium (MED), low
(LO) or auto (AUTO).

MODE button

Used to select the operation of AUTO, FAN, COOL, or DRY.

TEMP (UP/DOWN) buttons

Used to select the desired temperature.

AIR SWING (AUTO/MANUAL) buttons

Used to determined the air swing condition, either auto or
manual.

FILTER RESET button

Press to reset the “FILTER RESET” display after washing the fil-
ter.

TEST RUN button*

VENTILATION button*

ECONOMY operation button

Provides Energy saving function

ODOUR WASH button

Provides deodorizing function.

CHECK button

Press this button if the check display is flashing.

TIMER/CLOCK SET buttons

Used to set the timer operation and the current time.

Operation indicator

Lights up when the unit in operation.

Содержание CU-B14DBE5














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды