73
13.11 In-filter Deactivation Operation
This operation helps to deactivate virus and bacteria on filter after the unit turned off using nanoe-G generator.
In-filter deactivation start condition
o
nanoe-G is in ON condition before the unit is turned off either by OFF/ON button or OFF Timer.
o
Elapsed time from previous in-filter deactivation operation is more than 24 hrs.
o
Unit operation time before unit is turned off is more than 2 hours or accumulated unit operation time achieves
4hrs if unit operation time less than 2 hours.
In-filter deactivation stop condition
o
The unit is turned on.
o
nanoe-G generator operation time during in-filter deactivation operation has achieved 120 minutes.
o
The unit received disable signal from remote control.
o
Nanoe-G abnormality occurs.
Control contents:
o
When the unit operate in Cool or Dry mode before turned off.
1. The unit will operate fan operation, fan motor will operate at 500 rpm for 30 minutes then stop.
2. During fan operation, horizontal vane will fixed at 30° (outer vane) and 63° (inner vane) for 30 minutes
then close.
3. After 30 minutes the unit will continue with common control.
o
Common control.
- nanoe-G generator will operate for 120 minutes.
Timer control
o
When ON Timer activates during in filter deactivation operation, in-filter deactivation operation stops.
o
When OFF Timer activates during in filter deactivation operation, in-filter operation will continue.
Indicator
o
nanoe-G indicator ON.
o
Power indicator OFF.
Enable or disable selection
iCOMFiAUTO-XHEATCOOLDRYFAN
F
SHOWER
DIRECT
AM
PM
AM
ON
OFF
PM
Transmit check code
“Enable or Disable” code
Remote control normal mode
Control
Disable
Control
Enable
Press
SW continuously for 5s
Press
SW’s to choose function 7
SET
Power failure
o
During in-filter operation, if power failure occurs, after power resumes in-filter deactivation operation will not
resume.