Panasonic CS-V28EKE CU-V28EKE Скачать руководство пользователя страница 30

Страница: 30 / 50

11.5.2.

Automatic Fan Speed Control

• When set to Auto Fan Speed, the fan speed is adjusted between maximum and minimum setting as shown in the table.

- Fan speed rotates in the range of Hi, Me and Lo-.
- Deodorizing Control will be activated.

- Auto Fan Speed during cooling operation:

1. Indoor fan will rotate alternately between off and on as shown in below diagram.
2. At the beginning of each compressor start operation, indoor fan will increase fan speed gradually for deodorizing

purpose.

3. For the first time the compressor operate, indoor fan will be switched to Hi fan speed from Lo- after 70 seconds from

the start of compressor. This cause the room temperature to achieve the setting temperature quickly.

4. During compressor stop, indoor fan will operate at Lo- for the beginning 20 seconds to prevent higher volume of

refrigerant in liquid form returning to the compressor.

5. After the compressor at turn off condition for 3 minutes, indoor fan will start to operate at Lo- to circulate the air in the

room. This is to obtain the actual reading of the intake air temperature.

6. When the compressor resume operation, indoor fan will operate at Me fan speed (after 70 seconds from the restart of

compressor) to provide comfort and lesser noise environment.

Содержание CS-V28EKE CU-V28EKE



















































Результаты поиска

Содержание CS-V28EKE CU-V28EKE

Отзывы:

Похожие инструкции для CS-V28EKE CU-V28EKE

Бренды по названию

Популярные бренды

Panasonic CS-V28EKE CU-V28EKE, Руководство по обслуживанию

Результаты поиска

Содержание CS-V28EKE CU-V28EKE

Отзывы:

Похожие инструкции для CS-V28EKE CU-V28EKE

Бренды по названию

Популярные бренды