Panasonic CS-G125KE CU-G125KE, Руководство по обслуживанию

Страница: 53 / 114

POWER
LOW HIGH
SLEEP TIMER
POWERFUL
POWER MONIT OR
Insert the power supply plug into an electri-
cal outlet and open the front panel.
Preparation (Indoor Unit • Remote Control)
1
Indoor Unit
■
Ensure that the power supply
plug is securely inserted.
A loose plug may cause a fire or an elec-
tric shock.
!
Warning
2
POWER
LOW HIGH
SLEEP TIMER
POWERFUL
POWER MONITO R
POWER SLEEP TIMER
P O W E R MONITOR
LOW
HIGH
Hold the panel
openers and pull.
Notes
3
Insert the air filters and close the
front panel.
POWER
LOW HIGH
SLEEP
TIMER
POWERFUL
POWER MO NITOR
Lift up slightly,
then pull down.
DBT
WBT
DBT
WBT
DBT
WBT
DBT
WBT
COOLING
32
23
43
26
30
–
24
18
Indoor
Outdoor
Indoor
Outdoor
HEATING
DBT: Dry Bulb Temperature
WBT: Wet Bulb Temperature
Max. Temperature
Use under the following conditions:
16
11
16
11
2
–
–5
–6
Min. Temperature
Unit in °C
Air filters
Air purifying filters
Insert the new
air purifying fil-
ters. (Be sure
the “FRONT”
mark is facing
you).
Remove the air filters and insert the air
purifying filters.
•
If the unit is not going to be used for an extended period of time, turn off the
Power Supply. If it is left at the ON position, approximately 2.8 W of electricity
will be used even if the indoor unit has been turned off with the remote control.
When standby mode is activated, approximately 35 W of electric power will be
consumed on the heat of compressor to warm up the room quickly. This mode
can be switched off if you do not require it. Please consult your dealer.
•
If operation is stopped, then restarted immediately, the unit will resume
operation only after 3 minutes.
POWER
LOW
HIGH
SLEEP TIMER
POWERFUL
POWER MONITOR
3 min.
53
CS-G95KE CU-G95KE / CS-G125KE CU-G125KE