Panasonic CS/CU-HU12ZKY Series, Руководство по эксплуатации и установке

Страница: 10 / 32

1
2
1
2
FAN SPEED
JET STREAM
ON
POWERFUL
MODE
TEMP
SWING
DISPLAY
CANCEL
CLEAN
CLOCK/
LOCK
RESET
RC AC
CHECK SET
SLEEP
SMART
SWING
OFF
AIR CONDITIONER
converti7
1
2
1
2
FAN SPEED
JET STREAM
ON
POWERFUL
MODE
TEMP
SWING
DISPLAY
CANCEL
CLEAN
ECONAVI
nanoe
CLOCK/
LOCK
RESET
RC AC
CHECK SET
SLEEP
SMART
SWING
OFF
AIR CONDITIONER
converti7
How to use
Auto OFF/ON button
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• Press the button to switch ON the unit.
• Press the button again to turn OFF.
Remote control
display
Remote control
receiver and indicator
ECONAVI
nanoe
ECONAVI
Wi-Fi
nanoe
Wi-Fi
TIMER
10
SLEEP
To maximise comfort while
sleeping
• This operation provides you with a comfortable
environment while sleeping by gradually increase
the set temperature 1 °C after every 3 hours operation.
• The unit is turned off after 8 hours.
• Can be cancelled by pressing the respective
button again.
SLEEP: Display on remote LCD
To select operation mode
AUTO - For your convenience
COOL - To enjoy cool air
DRY - To dehumidify the environment
• During operation, based on Set and Room temp.
operation mode will be judged and IDU fan motor
will be OFF during this period.
• To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
• Unit operates at Low fan speed to give a gentle
cooling operation.
*Vertical flaps will not work in AUTO air swing in HU and
AU18***4F Model.
FAN - To operate Air-Con in “Fan Only” mode
* Indoor unit temp. display will show set temp. for
AUTO,COOL & DRY mode and room temp. for FAN
mode.
• Only indoor unit fan operates as per remote settings.
• Outdoor is OFF, so no cooling achieved.
• Provides air circulation in the room.
MODE
Press for “5” seconds to
lock / unlock remote keypad.
When keypad is locked, remote
display will show ‘LOCK’ when
any button is pressed or press
to set clock.
Not used in normal
operations.
Long Press to restore the
remote control to default setting.
‘CL’ will be displayed on unit and remote controller.
While ‘CL’ is displayed, all other functions of the
remote controller will be disabled, except for
ON/OFF button. Applicable for 10 to 15 minutes.
This feature can only be used in OFF condition.
*CLEAN
To clean dust on Evap. Coil of
the Air-Conditioner Unit
To OFF/ON hidden temperature
display
• When the display is turned OFF by remote controller,
It will turn ON automatically for few seconds upon
receiving any command from remote or in case of
mains power reset.
DISPLAY
To turn ON/OFF Wi-Fi function
of Air-Conditioner Unit.
SMART
Wi-Fi
Press button for one time to switch ON Wi-Fi.
Press & hold button for “5” seconds to enter
in setup mode.
Press followed by CANCEL button to turn
OFF Wi-Fi for “4” hours.
Press & hold CANCEL button for “10” seconds to
check Wi-Fi connection.
SMART
SMART
SMART
(For WU/XU/PU Series) (For AU Series)
Wi-Fi
TIMER
(For HU Series)
Wi-Fi
(For AU18***4F)
Applicable for AU Series